Specifications
1. Bright surface2. Various designs .
3. Best material and good price
4. Solid and easy to work
5. Quick delivery
Belt clip is designed for taking light things on the surface of clothes but without any pockets , two belts folded with a U shap on the one end and a small gap on the another end , a belt is sticked with pocket that can hold things and another half belt is inserted on the belt like on your waist , then , the the pocket is fixed on the belt and some things can be put in that ; There are many belt clips are used such for mobile pocket and waistband etc
Advantages for Belt clip
1) Strong tensile and large load .
2) Light but good flexibilty
3) Customization design
4) Super in material .
5) Smooth body
6) Different sizes
model 1
This belt clip with two bended flat panel , and one end is turn up to the opposite of the clip and another end is flat . it is available for different belts , bags and holders and so on .
Sizes
L | w | thickness |
50 | 19 | 1.0 |
70 | 19 | 1.0 |
80 | 19 | 2.0 |
100 | 19 | 2.0 |
Material
Stainless steel
Finish
NA
model 2
This belt clip is same as the model 1 only it is tilting on the both ends .
Sizes
L | W | thickness |
80 | 19 | 0.8 |
60 | 19 | 0.5 |
70 | 19 | 0.5 |
50 | 19 | 1.0 |
Material
Stainless steel
Finish
NA
model 3
This belt clip is made in a straight steel panel and then bend from the middle of the panel , two holes are located on the both ends for hold small somethings .
Size
L | W | Thickness |
70 | 20 | 0.5 |
85 | 20 | 0.5 |
90 | 19 | 1.0 |
40 | 19 | 0.8 |
Material
Spring steel
Finish
NA
model 4
Model 4 belt clip is similar with model 2 but the height of the body is lower than the model 2 .
Material
Stainless steel
Finish
Polish
Quality control
The quality control is strict , all items must be go through following steps
(1) Checking raw material before feed in
(2) IPQC ( by handle and auto-machined control )
(3) Chemical elements analysis and fhysical testing ;
(4) The second inspection , sort all finished goods by sorting machines if required ;
(5) Packing
(6) Last inspection ( spot checking , packages status , quantity etc )
(7) Delivery
Introduction of material
Stainless steel
1) Super material .
all material are tested before feeded in and meet or over given requirements or standard .
2) Exceptional Anti-rust performace .
stainless steel material is good resistance from rust ,generally , finished goods can be anti-rusted over 72 hours under 96% salty sprey . so the most goods in outdoor or on seaside are choosed stainless steel as the first material .
As stainless steel contains nickel and chrome elementes , it is one of the best material that on resistance rust , especially for working surroundings with much acidity .
3) Nice surface .
goods are polished after finished forming . this is a good choice for ornamental parts . besides , stainless steel parts also can be finished in different colors per surface of fittings . In fact , stainless part itself has bright appearance .
4) Strong Strength .
As stainless steel has more "C" element , especially martensite stainless .
5) Antibiosis .
Most medical equipments are made from stainless steel as it can be up to 99% on killing bacteria .
6) Outstanding weldability .
The part under normal temperature is showing austenite status , and keep the perfect comprehensive performance .
7) High hardness .
Parts are made from alloy elements material .it is up to HRC58 or more high .
8) Resistance to abrasion .
High hardness ensures parts can resist abrasion during operation .
9) Enviromental protection .
Picked material and finish treatment are based on ROHS or GB standard
Spring steel
1. Excellent Flexibility .
Parts are made from super quality spring steel , this kind of material has good elastic deformation , which can keep the original shape long time even there is much loading during service .
2. High Strength .
Parts were formed and then must be quenched in 400 degree x 15 minites and anti-fatigue is up to 240 Mpa .
3.Perfect stability .
Inside components and instructure of part are reformed after quenching , keeping this status long time , and that make part satisfied expect requirements .
4. Good heat resistance .
Spring steel part can be worked smoothly under 500 degrees surroundings , so , which is the ideal choice for part that in bolier , car , steam valve etc .
5. Low cost .
As spring steel is easy to make and full automated production ,
6. Easy to oparation .
Simple structure and strict tolerances.
7. Nice appearance .
Parts were plated after forming and also can be coated different colors based on request of fittings .
8. Enviroment friendly . All chemical elements and surface treatment are meet for the relative standards .eg , GB , ROSH etc .
9. Resistance of oxidation. Part with “V”chemical element , and also can do oxidize surface treatment to improve resistance for oxidation .
FAQ’s
Q. How about your capacity ?
A. With scale of ten thousand square meters , different processing machines , we are able to finish up to 2000 tons raw material every year , generally , one full 20 feet container ( about 20 tons) can be done in 20- 25 days .
Q.How long I can get samples for approval before placing order ?
A. Let you get and confirm samples in first time is our reponsiblity and pleasure , just in one week for new samples that need to be done in new tools , and we can deliver samples within 24 hours for exsiting samples once received your request .
Q.What are your popular payement menthods ?
A. T/T is our prior choose for all , of course , we are also accept L/C , Westunion , paypall .
Q. What production you produce ?
A. We are producing different screws like machine screws , self tapping screws , wood screws , stainles steel screws and self drilling screws etc and metal stamping parts and belt clips etc .