1. The side wall of bed is constructed of double-rib plates and internal rib plate employs combined structure of box-type and bevel ribs, Rigidity of machines increases a factor of by 1/3 times compared with that of n-type ribs of single wall.
2. Operations are concentrated. On the apron. there is a device which can move rapidly and is operated by a single handle. Braking and rotating direction change of spindle is visualizedly controlled by hydraulic system.
3. Both rigidity of construction and rigidity of transmission are high, so precision is stable and heavy cut can be carried out.
4. Owing to the saddle guideway which is inlaid with TSF wear-resisting material plate, the carriage moves lightly and nimbly. The service life of the guideway is extended. Lubricating system circulates from the external independent storage tank, thus cutting precision is increased.
5. The spindle bore is 104mm. The tailstock is equipped with a graduated disc and graduated line. The machine is characterized with elegant appearance and easy to be cleaned and maintained.

Model Specification			CW61100B	CW61125B
Max. Swing Diameter Over Bed			1000mm	1250mm
Max. Length of Workpiece			1500/3000/5000/8000
Max. Turning Diameter			1300/2800/4800/7800
Max. Swing Diameter over Carriage			610mm	860mm
Spindle Bore			130mm
The Width of Rail			755mm
The Hole Taper before Spindle (Metric System)			Front Φ140 Metric1:20
Number of Speeds (Reverse)			3.15-315 r/min
The Rotate Speed of Spindle	N1	Positive	3.5-278 r/min
		Reverse	2-200 r/min
	N2	Positive	2.24-178 r/min
		Reverse	0.10-12mm
Range of Feeds Per Spindle Revolution		Longitudinal	0.05~6mm(1/2 Longitudinal feeding
		Transverse	0.025~3mm(1/4Longitudinal feeding
		Top Slide Rest	1/2 Standard feeding
		Exiguous Feeding	44kinds
The Range of Turning Threads		The Kinds of Metric Threads	1120mm
		The Range of Screw-pitch	31kinds (Metric System)
		The Kinds of Inch Thread	28-1/4 t.p.i
		Range of Module Inch Threads	45 kinds
		The Kinds of Module Threads	0.560mm
		The Range of Module Threads	38 kinds
		The Kinds of Diametral Pitch Threads	1/2-56DP
		The Range of Diametral Pitch Threads	45mm × 45mm
Tool Post		The Sectional Dimension of Tool Bar	520mm
		Max. Traverse Traveling of Lower Tool Bar	300mm
		Max. Traveling of Upper Tool Bar	160mm
Tailstock		Diameter of Tailstock Quill	300mm
		Max. Travel of Quill	Morse 6
		Taper in Bore of Tailstock Quill	22kw
Power of Main Motor			1.5kw
Cooling Pump Power			0.12kw
Hydraulic Pump Power			120w
Max. Load of Lathe			5500kg