Specifications

Description

• Large incubator with high volume for warm air incubation and CO₂-control. Local CO₂-control is possible with the CO₂-Controller and specific CO₂-Covers.
• The incubator encases the microscope from the lamp housing to the objective nosepiece and warms up all enclosed components by heated air. No Objective Heaters are necessary. The homogeneous heat distribution offers best conditions for high resolution live cell imaging applications. The large internal volume allows the use of many different components like stages, heating inserts or micromanipulators.
• Two large sliding doors (160 x 130 mm) allow easy access to the specimen and other components. Smaller sliding doors below the microscope stage (90 x 115 mm) permit an easy operation of components like the objective turret or filters. Cables and tubing can be routed through the outside by two sliding doors in the back side of the incubator. The lamp support can be swivelled back when the incubator is mounted to the microscope. The temperature sensor can be freely positioned inside the incubator to adapt to different setups.
• Compatible to all condensers.
• Easy and quick assembly, no tools are necessary.

• Olympus IX70 – S1F2 with object guide, mechanical stage or scanning stage
• Micromanipulators InjectMan, InjectMan NI2, TransferMan by Eppendorf
• Micromanipulators by Narishige

A selection of compatible heatable components:

• Heating Insert P
• Heating Inserts M06-M96
• Heatable Universal Mounting Frame K Series

Components additionally needed for CO₂-control:

• CO₂-Controller
• CO₂-Cover (different versions available