Specifications

EDM zinc coated wire electrode
1.Size:0.1-0.3m
2.Material:CuZn35
3.Tolerance:-0.002mm
4.Smooth surface,

 EDM coated wire electrode 

 

1.Size:0.1-0.3m
2.Material:CuZn35
3.Tolerance:-0.002mm
4.Smooth surface, low impurity content

Specifaction

 

Type	Diameter                   (mm)	Tolarance              (mm)	Tensile strength                 (Mpa)	Surface treatment	Conductivity (%)
Hard or Semi hard	0.10	+0, -0.002	980min	Paraffin free	22min
	0.15
	0.20
	0.25
	0.30
Soft	0.10	+0, -0.002	442min	Paraffin free	25min
	0.15
	0.20
	0.25
	0.30

 

Advantage

1. Faster cutting speed, higher cutting accuracy compare to plain wire.
2. Precision tolerance (-0.002mm), high regularity
3. Advanced heat treatment techniques endure stable tensile strength and protect wire from breakage.
4. Superior straightness and roundness makes self-threading process easier.
5. High purity copper wire (≤65%) are used.
6. Packed by carton box (excluding plastic element), more environmental friendly

 

 BUNOL A 900 can be used on all EDM machines. It is recommended for standard applications in the areas of moulds, for the manufacture of cutting tools or general mechanics parts. In this case BUNOL A 900 constitutes the best compromise in terms of its cost, precision and the quality of its

Packing

5KG/roll, 4rolls per carton

carton weight=20kg

 

Carton size;340mm*250mm*195mm

Volume per Carton = 0.35*0.26*0.18*=0.0166 CBM  

1000KG wire will be packed  in 50carton  Total Volume =0.35*0.26*0.18*50=0.83 CBM  

A full 20 foot container can load    26 / 0.83 =21.5      21.5*1000 = 21500 KG