Name: Intelligent Horizontal Operating Range Under The Bridge 11.8~21m Bridge-inspection Vehlcle/Truck
Brand: YUTONG
Availability: InStock

Product Details

Intelligent Horizontal Operating Range Under The Bridge 11.8-21m Bridge-inspection Vehlcle/Truck

Product Description

Main Technical Parameters of Bridge-inspection Truck

Vehicle model of bridge-inspection truck	YTZ5310JQJ21
Chassis model of bridge-inspection truck	CA1313P7K1L11T4E
Chassis manufacturer of bridge-inspection truck	China FAW Group Corporation
Engine model of bridge-inspection truck	FAW BF6M1013-28E3
Engine power of bridge-inspection truck (kw/Ps)	206/280
Wheelbase of bridge-inspection truck (mm)	1900+4500+1350
Rear axle of bridge-inspection truck	13T class double rear axle
Tire of bridge-inspection truck	11.00R20 Steel wire tire

Horizontal operating range under the bridge (mm)	11800~21000
Working platform's maximum dimension of getting off the bridge (mm)	8300
Rated load/remote load of working platform (kg)	600/300
Swing angle of working platform under the bridge (°)	180
Distance of crossing the sidewalk (mm)	2100~2500
Height of crossing the guardrail (mm)	2200
Structural type of working platform	Trussed type
Main power of working device	Take the force from chassis through power take-off
Standby power of working device	Gasoline engine unit
Drive type of self-propelled device	Hydraulic drive
Self-propelled spee of bridge-inspection truck d (m/min)	≤12
Operation method of bridge-inspection truck	Manual, electric control
Communication mode of bridge-inspection truck	Wired and wireless intercom system
Monitoring mode of bridge-inspection truck	Wired monitoring system

produce picture

Performance

Performance characteristics of Bridge-inspection Truck

1.The material of trusswork of YTZ5310JQJ18 bridge-inspection truck adopts high-strength rectangular tube imported from Germany.

2.The complete set of software and hardware products of electrical control system uses the products of Italy 3B6 Company. All the main components of hydraulic system adopt the products produced by Germany HAVE, Italy RR, OilControl, Denmark Danfoss and other international well-known manufacturers.

3.The bridge-inspection truck has taken a five-day reliability test. Its standby power is imported from Honda.

4.The key positions of this bridge-inspection truck have three limit switches, including mechanical limit switch, hydraulic limit switch and electrical limit switch, and they can be interlocked when the operator gets on and off the bridge-inspection truck e.

5.The automatic oil filling module which is independently developed by Yutong ensures the security of the vehicle’s hydraulic system. Operator can know the operating conditions in time through monitoring system. In order to prevent dangerous working conditions caused by strong wind .

6.The bridge-inspection truck is equipped with wind speed monitor.

7.Standard large-power generator provides independent power for the detection and construction under the bridge. The self-propelled capacity is strong during operation.

8.The bridge-inspection truck can be unfolded directly on the ground, without getting on the bridge, so it facilities the routine maintenance.

9.The passageway of working platform adopts non-barrier design.

Trade &company Shows