Name: YUTONG Euro Four Emissions Plain Coloured Green Big Energy-efficient Road Washer Trucks
Brand: YUTONG
Availability: InStock

Product Details

YUTONG Plain Coloured Green Big Energy-efficient Road Washer Trucks

Product Description

Main Technical Parameters of Road Washer Trucks

Item		Unit	YTZ5160TXS20F
Cleaning Operation Of road washer trucks	Maximum cleaning & sweeping width (Including cleaning & sweeping width of curb)	m	4.1
	Cleaning and sweeping speed	km/h	3~10
	Rated pressure of cleaning water	Mpa	14
	Rated flow of cleaning water	L/min	137
Sweeping Operation Of road washer trucks	Sweeping width	m	3.5
	Sweeping speed	km/h	3~15
	Cleaning speed	km/h	3~20
	Maximum cleaning capacity	square meters/h	70000
	Discharge angle	°	≥48
Cleaning width under low pressure Of road washer trucks		m	24
Total volume of cleaning water tank		L	9000
Total volume of dustbin		L	7000
Maximum vehicle speed Of road washer trucks (full load)		km/h	90
Maximum grade ability Of road washer trucks		%	30
Braking distance Of road washer trucks (30 km/h with full load)		m	≤10
Min. turning diameter Of road washer trucks		m	19
Kerb mass of entire vehicle		kg	11640
Max. gross mass Of road washer trucks		kg	16000
Wheelbase Of road washer trucks		mm	5000
Angle of approach		(°)	20
Angle of departure		(°)	12
Minimum ground clearance Of road washer trucks		mm	250
Overall dimension Of road washer trucks (L × W × H)		mm	8590×2490×3050

main configuration

Main Configuration of Road Washer Trucks

Item Of road washer trucks			YTZ5160TXS20F
Vehicle chassis	Chassis model, type, manufacturer		Dongfeng DFL1160BX5
	Engine model, manufacturer Of road washer trucks		Dongfeng Cummins ISDE210 40 (National IV)
	Rated power of engine		155kw/2500r/min
	Transmission model Of road washer trucks		DF6S900
	Speed ratio of transmission		1:6.446: 2:3.841: 3:2.290: 4:1.477:5:1.000:6:0.802:R:6.188
	Drive axle		Single-stage, hyperbolic main gear reducer Speed ratio i=5.286
	Tyre Of road washer trucks	Front wheel	10.00-20 (10.00R20)
		Rear wheel	10.00-20 (10.00R20)
	Fuel type Of road washer trucks		Diesel oil meeting the third stage emission requirements; the selection of appropriate diesel grade is in accordance with the temperature
Auxiliary engine	model, manufacturer Of road washer trucks		EQ6BT5.9-C160 Dongfeng Cummins Engine Co., Ltd.
	Power Of road washer trucks		118kw/2600r/min
	Clutch Of road washer trucks		Automobile clutch, adopting pneumatic drive and electrical automatic control

produce picture

Performance

Performance Characteristics of road washer trucks

1.Dongfeng Tianjin DFL1160 series chassis occupies the industry's highest market share, with industry-leading reliability.

2. High pressure water pump imported from Italy has high pressure resistance, large flow and long service life; Japan SMC's pneumatic system is the world's top pneumatic system brand, which is efficient, energy-saving and has reliable quality

3. The ATOS manifolds & valve packs imported from Italy provide reliable quality, without any leakage and failures; auxiliary engine, in which Dongfeng Cummins invested heavily, has advanced technology and reliable quality; radiator of auxiliary engine, with reinforced design and the largest area in the industry, can guarantee the normal operation even at high temperature above 40 ℃, so as to avoid the industry's ubiquitous high temperature problem of auxiliary engine.

4.Water pump drive Of road washer trucksadopts pneumatic gear clutch, which will cut off the power of high pressure water pump under the mode of cleaning, so as to extend the service life of the high pressure water pump.

5. The road washer trucks adopts Dongfeng Cummins auxiliary engine with air-to-air intercooler that makes diesel burning more fully, not only saving fuel, but also realizing good emissions, truly reflecting the design concept of fuel-efficient and environmental friendly.

6. The suction system Of road washer trucks has reasonable matching and low energy consumption after being optimized by academician workstation; the design widely applies software of finite element analysis, not only making components meet the stiffness and strength requirements, but also greatly reducing the weight, realizing the most efficient operating economics.

7. The road washer trucks adopts the latest research results of noise control of Zhengzhou Environmental Engineering Research Center, so its noise control has achieved the best level in the industry, minimizing the environmental impact.

8. The garbage tank road washer trucks is sealed by imported foamed rubber, with good performance in resistance to compression deformation and in resistance to corrosion, resulting in no omission of garbage during the process of sweeping and transportation, so as to secondary pollution.

9. The set of emergency stop switch and selector switch for the control system and the interlocking design in the program can effectively prevent the misuse or malfunctionpan.

10. The dual protections by hydraulic lock design and safety support can prevent the sudden falling of dustbin during the maintenance and repair process, so as to avoid personal injury; when lifting the dustbin to dump the garbage, open the rear door first through the automatic control program, so as to prevent lifting the dustbin with full load, avoiding rollovers.

11.Automatic alarm for vehicle faults; computer detects faults and judges the faults accurately, so it can instantly catch the fault source; the turn angle of cab is large, resulting in sufficient space for maintenance.

12. Remote starting and stopping devices can avoid the problem of making such operations within a tipping cab; due to eversion-type outside plate of front wall of the cab . road washer trucks, operator can take routine maintenance without the need of flipping the cab.

13.Two repair doors road washer trucks are set on right and left sides of the engine hood, making the routine maintenance of auxiliary engine become more convenient and close enough.

Trade &company Shows