Flap Disc Machines, buy Epoxy glue for flap disc , Flap disc epoxy glue, Epoxy Adhesive, Flap disc Epoxy Adhesive, Epoxy resin adhesive on China Suppliers Mobile

Product Details

Technical characteristics,/

1. Should be poured the adhensive rapidly.

2. After pouring the glue ,Colloidal will spread fast , and the probability of emery cloth fall down is low.

3. High resin solid content , solidifying material has high bonding, high heat resistance and good toughness.

performance index

Iterm

Data

Test methods

Viscosity mpa·s80°C

9000-150000

GB/T2794

Ohms(Ω)·cm

>5.0×10¹²

Coated 170°C solity 2h

Shearing strength in normal temperature ( mpa)

>12.0

GB/T7124

200°C Shearing strength (mpa)

>2.0

GJB444

non-volatile matter

>99%

GB/T2703

Data of rewind in normal temperature

>21000

Method of use

1. Before use the Synthetic Resin Adhesive need preheated in ( 50-60 ) °C for 60min, after installed on the machine the Synthetic Resin Adhesive temperature is 45-50°C.

2. After assemble the flap disc should be put into the oven with the temperature up to 130°C and heat preservation for 2h-3h .

Packing

Colloidal packing 280kg per barrel, or can also be based on customers demand using non-standard packaging.

1. Automatic flap disc machine, flap disc making machine

Contact Manager:Ludy Yang

Automatic Flap Disc Machine Details:

Backing Pad size	75mm---180mm
Finished Flap Disc Size	75mm-180mm(3"--7")
Flap Type	T27/T29
Flap Size	11-40mm x 11-40mm
Flaps Per Disc	35~155Flaps
Max Power of Host Engine	5KW
Power of Glue Pump	1.2KW
Electrical Power Supply	380V/ 50--60HZ
Qty of Rotary Pllate	6Plate
Size of Host Engine	1300mm(L) x600mm(W) x 1800mm( H )
Size of Pump	1100mm(L) X650MM(W) X 1500MM(H)
Size of Feeding system	1000mm(L)x 400MM(W) x 1450mm(H)
Hot Engine Weight	709KGS
Glue Pump Weight	280KGS
Production	9000 Pieces /10Hours

2.Automatic grinding wheel machine, Grinding wheel making machine

Grinding wheel mould machine for fiber reforced thin resin bond cutting wheels and depressed center wheels

Technical specification:
(a) Products specifications: diameter 100-400mm ,thickness 1-8mm, flat, parallel, cymbals form, inter and outer net, paste brand etc different kinds cutting wheels and depressed center wheels;

(b) Rating press:315 ton, cast steel beam;

(d) Scrape mode: fix volume revolving switch, electrical sloping plate slightly raise;

(e) Control mode: PLC control;

(f) Capacity: 7 seconds/ per grinding wheel (single head is about 4000-5000 discs/eight hours, double head is about 8000-10000 discs/eight hours );

(g) With pre-press function and cover board automatic convey;

(h) Operators:3 persons;

(i) Another descriptions: According to difference technics and products, this kinds machine can be made up to twenty four workstation, thirty two workstation etc.

Automatic flap wheel machine, flap wheel making machine

3. Automatic flap wheel machine, flap wheel making machine

4. Steel wire wheel making machine