Name: Pearmain IR IP CCTV high speed Dome camera with 20*optical zoom
Brand: PEARMAIN
Availability: InStock

Product Details

Product Description

Introduction Features

Support High definition output(1920x1080@30p)network encode output.

Support progressive scanning to have clear video, WDR.

Support remote firmware updating by TCP/IP.

It can set address & protocol in speed dome OSD menu

Automatically identify SANYO, SONY, HITACHI, CNB series etc. camera module.

Powerful OSD menu for setup of Programmable Functions

With function of auto focus, auto iris, auto white balance and auto backlight compensation etc. to have clear camera scene at any time.

Built-in linear power for anti-surge and anti-Lightning protection

Preset position storage function, it can save maximum 255 preset.

8 cruise tours, every tour can call 32 preset.

1 automatic scan, the scope of two limits can be scanned gradually, the scanning steps are optional.

Power-up action, preset, cruise tour, pattern tour, auto scan, etc. available for it.

360° continuous panning.

-5°~90° tilting rotation, automatic flip function, continuous tilting between -5°to 185°.

Privacy masking function, Up to 24 Zones, 8 Zones Masked Simultaneously in One Camera Image .

Soft address to set

On-Screen display: Compass, Pan, Tilt, Zoom ratio.

IP66 waterproof for outdoor applications

100m IR distance

Network

Video Compression	H.264 MP
Pixel	1920*1080
Frame Rate	1080p/29.97fps, 1080p/25fps, 720p/59.94fps, 720p/50fps
Network	10/100M
Protocol	TCP/IP,HTTP,DHCP,DNS,DDNS, PPPoE,SMTP,NTP etc...
Port	RJ-45,10/100Base-T
Video detection	support
Network	10/100M
Bit rate	50Kb-8Mb
Browse	Web browse and setting
User login	6, at same time.

Block Camera (Sony FCB-EH6300)

Image sensor	1/2.8-type ‘Exmor’ CMOS
Signal system	HD: 1080p/29.97, 1080p/25, 1080i/59.94 (frame out 29.97 PsF), 1080i/50 (frame out: 25PsF) 720/59.94p, 720/50p, 720p/29.97, 720p/25 SD: NTSC, PAL (640x360)
Number of total pixels	Approx. 3.27 Megapixels
Lens	20x optical zoom, f=4.7 mm (wide) to 94.0 mm (tele), F1.6 to F3.5
Digital zoom	12x (240x with optical zoom)
Angle of view (H)	1080p/30 mode: 55.4° (wide end) to 2.9° (tele end)720p/60, 30 mode: 37.6° (wide end) to 1.95° (tele end)
Minimum working distance	10 mm (wide) to 1000 mm (tele) (Default 300mm)
Sync system	Internal
Minimum illumination	High sensitivity mode: 0.5 lx (ICR Off) 0.095 lx (ICR On) (F1.6, 50 IRE)Normal mode: 1.7 lx (ICR Off) 0.3 lx (ICR On) (F1.6, 50 IRE)
S/N ratio	More than 50 dB
Electronic shutter	1/1 to 1/10,000 s, 22 steps
White balance	Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapour Lamp (fix/Auto) One-push, Manual
Gain	Auto/Manual (-3 to +28 dB, +2 dB step/total 16 steps) Max. Gain Limit (+6dB to +28 dB, +2 dB step/total 12 steps)
AE control	Auto, Manual, Shutter Priority, Iris Priority, Bright, Spot AE, Slow AE (approx 5 minutes)
EV compensation	N/A
Focusing system	Auto (Sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom Trigger AF, Focus compensation in ICR on.
Video output	HD Analogue: Component Y/Pb/Pr; Digital Y/Cb/Cr 4:2:2 via LVDS (signal format conforms to SMPTE296) SD VBS
Camera control interface	VISCA (CMOS 5 V level), baud rate: 9.6 Kb/s, 19.2 Kb/s, 38.4 Kb/s, stop bit: 1bit

Parameter Description

Pan-tilt:

Address	0~255
Pan range	360°Continue
Tilt range	0°~90° Flip
Manual speed Pan	0.05~240°/Sec
Manual speed Tilt	0.05~180°/Sec
Preset speed	300°/Sec
Preset accuracy	±0.50°
Preset	255
Remote firmware updating and setup	to update firmware by RS485, to set ID by RS485
Cruise Tours	8 Programmable(Dwell time speed preset point)
Speed setup for cruise tour	Yes
Auto Scan	1 Programmable (355° scan )
Time adjustment	to adjust Time by broadcasting
Integrate multi-protocol	Pelco_D/P, PEARMAIN or OEM protocol
Protocol Automatic identify	Pelco_D/P, PEARMAIN
Broadcasting address	Yes
anti-surge and anti-Lightning protection	Yes, Power side:4KV, Video and data side: 2KV
OSD menu operation	Yes
Supporting camera	Automatic identify(Sony, Hitachi ,etc.)
Camera menu operation	Yes
Camera character programming	20 character
Privacy masking	Yes
Ingress Protection IP66	Yes
Operating Temperature	–40℃~70℃
Humidity	0%~90% (Non condensing)
Heater operate	(-5)℃ on +5℃ off
Power	24VAC±25%,60Hz/50Hz
Consumption	IR off 15W IR on 35W
communication	RS485 (+/-)
Connection	BNC cable
Weight	4.5kgs (without bracket)

Company Profile

provider owing the ability of R&D, producing, marketing and service. Pearmain has a complete production line and endeavors itself to providing our customers with entire video surveillance system solutions.

Nowadays, Pearmain has developed itself into one of leading matrix manufacturers with 18 branches in China. We have 20 years of experience in designing and researching in video surveillance field. We specially focused on designing and producing high qualified HD matrix switcher.
Our product compatibility enabled us to offer second development port or SDK for interconnection
and communication from the 3rd party equipment or platform from almost 70 companies.