Product Details

Bar reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets. The fabric is used to provide tensile strength and crack control to structural concrete elements.

Material of Bar Reinforcing Mesh: steel bar, iron rod

Wire diameter: from 3mm to 16mm.

Panels opening: the Horizontal from 50mm to 200mm, the Vertical from 25.mm to 500mm.
Panel length: 1.0m to 12m

Panel width: 0.5m to 3.0m.

Applications: bar reinforcing mesh is widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.

Because of large weight & volume, the mesh is normally packed by bundle by steel belt to ensure the safety of transportation.

Common specification:

DIN488 GERMAN STANDARD (SIZE: 2150MMX5000MM)

Ref No.	Std Unit	Longitudinal Wires mm	Cross Wires mm	Pitch of wire	Mass Kg	Mass Kg/m2
Q131	Sheet	5	5	150 @ 150	22.476	2.091
Q188	Sheet	6	6	150 @ 150	32.401	3.014
Q221	Sheet	6.5/5.0	6.5	150 @ 150	33.707	3.136
Q295	Sheet	7.5/5.5	7.5	150 @ 150	44.245	4.116
Q378	Sheet	8.5/6	8.5	150 @ 150	66.659	5.157

AS/NZS 4671:2001 Australia/New Zealand Standard (SIZE: 6000X2400mm)

Ref No.	Std Unit	Longitudinal Wires mm	Edge Wires mm	Cross Wires mm	Mass Kg
SL81 (F81)	Sheet	7.6 @ 100	7.60 @ 100	7.60 @ 100	105
SL102 (F102)	Sheet	9.5 @ 200	6.75 @ 100	9.50 @ 200	80
SL92 (F92)	Sheet	8.6 @ 200	6 @ 100	8.60 @ 200	66
SL82 (F82)	Sheet	7.6 @ 200	5.37 @ 100	7.60 @ 200	52
SL72 (F72)	Sheet	6.75 @ 200	4.77 @ 100	6.75 @ 200	41
SL62 (F62)	Sheet	6 @ 200	4.77 @ 100	6 @ 200	33
SL52 (F52	Sheet	4.77 @ 200	4.77 @ 100	4.77 @ 200	21

BS4483 BRITISH STANDARD

Ref No.	Std Unit	Longitudinal Wires mm	Cross Wires mm	Pitch of wire	No. of sheet per ton	Mass Kg/m2
A393	Sheet	10	10	200 @ 200	15	6.16
A252	Sheet	8	8	200 @ 200	22	3.95
A193	Sheet	7	7	200 @ 200	29	3.02
A142	Sheet	6	6	200 @ 200	40	2.22
A98	Sheet	5	5	200 @ 200	57	1.54