Original New Sealed Small Business WAP4410N - Wireless access point
USD $155 - $199 /Piece
Min.Order:1 Piece
Shenzhen Importgm Technology Co., Ltd.
100% original new small business SG 300-28P 28-port Gigabit PoE Managed Switch
CISCO 32M FLASH use for Cisco2600,Cisco2600XM routers MEM2600XM-32FS-SP=
MEM2801-256D= original 256MB SODIMM DRAM for the Cisco 2801 router
MEM2801-64D= original Cisco 64MB DRAM for the Cisco 2801 router
MEM2801-128D= original Cisco 128MB DRAM memory for Cisco 2801 router
Highlights
• Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b and g devices
• Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
• Protects business information with enhanced security, including rogue access point detection, advanced encryption, and select access filters
• Simplifies installation and configuration with easy-to-use web interface
Figure 1. Cisco WAP4410N Wireless-N Access Point: PoE/Advanced Security
Product Overview
Features
• Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per access point for your small business
• Easy installation and configuration via a web interface
• Adjustable and removable dipole antennas with multiple-input, multiple-output (MIMO) 3x3 diversity
• Gigabit Ethernet LAN interface
• Supports PoE and external DC power
• HTTP Redirect facilitates the display of a splash page on initial user access
• IPv6 host support for managing the access point over IPv6
• Multiple basic service set identifier (BSSID) support allows the creation of multiple secure wireless workgroups for users and guests
• Service set identifier (SSID) to VLAN mapping maintains application security and quality across wireless and wired
• WPS allows for simple and secure deployment of the wireless network
• Logging via syslog, email, or local log
• Wi-Fi Multimedia (WMM) wireless QoS support
Specifications | |
Standards | Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (Power over Ethernet), 802.1x (security authentication), 802.11i security WPA/WPA2, WMM |
Ports | Ethernet, Power |
Buttons | Reset |
Cabling type | Unshielded twisted pair (UTP) Category 5e or higher |
LEDs | Power, Ethernet, Wireless, PoE |
Operating system | Linux |
Setup/Configuration | |
Web user interface | Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
Management | |
Simple Network Management Protocol (SNMP) version | SNMP version 1, 2c |
Event logging | • Event logging • Email logging • Remote syslog |
Web firmware upgrade | Firmware upgradeable through web browser |
Diagnostics. | Flash, RAM, LAN, WLAN |
Dynamic Host Configuration Protocol (DHCP) | DHCP client |
HTTP Redirect | Redirects initial user access to an external web server to display company logo or network usage policy |
IPv6 host | • Support for management and control of access point over IPv6 • Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements) |
Network Capabilities | |
Multiple BSSID | Supports up to 4 BSSIDs, allowing the creation of multiple virtual access points |
VLANs | Supports 802.1q - up to 4 VLANs |
SSID to VLAN mapping | Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains |
Spanning Tree | Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system |
Operating modes | Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode |
Load balancing | Allows bandwidth control with user-defined CPU usage ratios |
Auto-channel selection | On boot-up, the access point selects the least congested channel |
802.11d regulatory domain | Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains |
Security | |
WEP/WPA/WPA2 | Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT |
Access control | Wireless connection control: MAC-based |
SSID broadcast | SSID broadcast enable/disable |
Client isolation | Supports wireless client isolation between and within SSIDs |
802.1X | Wireless clients can be authenticated through IEEE 802.1X |
802.1X supplicant | Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network |
RADIUS server | Up to 2 RADIUS servers can be configured for redundancy purposes |
WPS | Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network |
Rogue access point detection | New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network |
Quality of Service | |
QoS | • 4 queues • 802.1p VLAN priority • WMM wireless priority • Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS |
Wireless | |
Spec/modulation | Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM |
Channels | Operating channels: 11 North America, 13 most of Europe (ETSI and Japan) |
Internal antennas | None |
External antennas | 3 (omnidirectional) |
Transmit power | Transmit power @ normal temp range for FCC: 802.11b: 16 dBm @ 1TX, 19 dBm @ 2TX, 20.5 dBm @ 3TX 802.11g: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX 802.11n: 17 dBm @ 1TX @ MCS0~5/8~13, 13 dBm @ 1TX @ MCS6/14, 11 dBm @ 1TX @ MCS7/15, 20 dBm @ 2TX@MCS0~5/8~13, 16 dBm @ 2TX @ MCS6/14, 14 dBm @ 2TX @ MCS7/15, 21.5 dBm @ 3TX@MCS0~5/8~13, 17.5 dBm @ 3TX @ MCS6/14, 15.5 dBm @ 3TX @ MCS7/15 Transmit power @ normal temp range for ETSI: 11b/g/n: 13 dBm @ 1TX, 16 dBm @ 2TX, 17.5 dBm @ 3TX |
Antenna gain in dBi | 2 |
Receiver sensitivity | 802.11.n: 300 Mbps at -69dBm 802.11.g: 54 Mbps at -73dBm 802.11.b: 11 Mbps at -88dBm |