Product Details

General industrial crane wireless remote control

Feature:

12 single step push button
Low, low power consumption transmitter 2 AA batteries last up to 4 months
Safety code: Over 4.3 billions unique ID code available.
Temperature range -40°C~ +85°C
Enclosure protection class IP 65
Microsoft Windows based software for easy customize configuration
Structure: Glass-Fiber

Standard Configuration:

1. One transmitter;
2. One receiver;
3. One 1m cable connect with receiver
4. One operation and maintain manual.

Specification:

TX Model	F24-12S-TX-V-(E)
TX Size	18.8x6.4x4.8(cm)
TX Weight	about289g(without Batteries)
Housing Materail	glass fiber-reinforced nylon-6
Protection Degree	IP65
Temperature Rating	-35°C ~ +85°C(Regardless of the battery temperature tolerance)
TX power Supply	Two 1.5 volts Batteries(AA Size)
Number of buttons	12 Single speed buttons,1 START button,1 mushroom button
Button Marking	arrow tip
I.D.Code	4.3 billion
Voltage Warning	TX Red LED will flash slowly when the volts under 2.2V,and unable to start TX under 1.8V.
Operating Frequency	310.0325-331.165MHz or 425MHZ-441MHZ
Channel Spacing	0.2675MHz
Channel	80CH
RF Power	<10DBm
Fault Detection	TX Red LED is flashing quickly: 1.Not in the correct way to start; 2.One of the pushbutton is jammed. TX LED will flash slowly: 1.Please change two new batteries

Application:

Single hook,Single speed hoist and Hoist crane and for industrial wireless remote control use which under 12 control points etc.

Certification:

Package

1 set per box, 6 pcs per carton.

WHy Choose us ?

1. More than 10 years researching and exporting experience in Radio Remote Control industry.
2.More than 20 people R&D working team, have the ability to research and develop new product independently.
3. Have 15 production lines. we also have many production machines such Printing circuit board machine, SMT machine, automatic wave soldering machine, automatic soldering robot, etc. also have many testing machine.
4. Well and high quality control, all working process according to ISO9001:2008.
5. CE, FCC & ISO certificates.
6. OEM acceptable

Factory picture:

How To Produce controller?

Notes:

The LED on the front of the transmitter indicates the condition of the batteries. It will flash green during operation if the battery power is sufficient, and will flash red if the battery power is low. If the LED is flashing red, or if the operation becomes erratic, or will only work from a short distance, replace both batteries with new AA alkaline batteries.