Specifications

1.manufacturer of the steel cord conveyor belt
2.factory in hebei , near tianjin port

   Iron ore/coal mine/mining steel cord conveyor belt

Steel cord conveyor belts are widely used in high strength,long distance and heavy load transportation of materials,and they are also used in high strength and short distance transportaion of materials on special occasions.

 

Classification:Open,With transverse Reinforcement Type,Tear Resistant type with embedded wire sensor

 

CHARACTERISTIS :

 

1. High tensile strength:The belts are suitable for large span,long distance transportation of materials

 

2. Small elongation in use:The belts need only a very short take-up stroke distance.

 

3. Small diameter of drive pulley:The bely body has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue.Therefore,drive pulley of smaller diameter can be used to make the equipment smaller.

 

4.High adhesion between rubber and steel cord:The steel cords are coated with zinc on their surface,and also the rubber used has the property of qood adhesion with steel cords.Therefore,the rubber is tighrly adhered to the steel cords and is resistant to shock and difficult to drop,so the rubber belts are long in life.

 

5.Even tension of steel cords:Out of our advanced techniques in manufacturing,the steel cords are very evenly arranged and have the same tension,so the belts are well balanced in running and difficult to run awry.

 

6. Good troughability:As the belt body has no transverse skeleton,it is easyv to from a deep trogh,so the belts can load more materials and prevent the materials from escaping.

 

7.Good troughability:As the belt boby has no transverse skeleton,it is easy to from a deep trough,so the belts can load more materials and prevent the materials from escaping.

 

8.Inspection of the belt with X-rays:Users can X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.

 

Specifications

High tensile strength:The belts are suitable for large span,long distance transportation of materials.

 

Strength	ST600	ST800	ST1000	ST1250	ST1600	ST2000	ST2500	ST3150	ST4000	ST4500	ST5000	ST5400	ST6300
Adhesion N/mm	54	60	64	69	74	84	98	108	118
Adhesion N/mm	60	70	80	95	105	105	130	140	145	150	16

 

Belt strength	Cord Diam d		Pitch P	Standard working	Standard Rubber Cover	Belt Weight	Min.Pulley	Cord Strength
(st-No.)	(mm)	Cord Structure	(mm)	tension(N/mm)	thicknes t1t2(mm)	(Kg/m2)	diam.(mm)	KN/piece
ST-630	3	6*7+1WS	10	90	5*5	20	800	6.93
ST-800	3.5	6*7+1WS	10	110	5*5	20.6	800	8.8
ST-1000	4	6*7+1WS	12	140	6*6	24.7	800	13.2
ST-1250	4.5	6*7+1WS	12	175	6*6	25.4	800	16.5
ST-1600	5	6*19+1WS	12	225	6*6	26	1000	21.12
ST-2000	6	6*19+1WS	12	285	8*6	30	1000	26.4
ST-2500	7.5	6*19W+1WS	15	355	8*6	32.2	1250	41.25
ST-3150	8.1	6*19W+1WS	15	450	8*8	35.7	1400	51.98
ST-4000	9.1	6*19W+1WS	17	570	8*8	37.8	1600	74.8
ST-4500	9.7	6*19W+1WS	16	645	8*8	38.7	1800	79.2
ST-5000	10.9	6*19W+1WS	17	715	8.5*8.5	41.9	1800	93.5
ST-5400	11.3	6*19W+1WS	17	760	9*9	43.9	2000	101
ST-6300	12.3	6*19W+1WS	18	900	10*10	48.3	2000	124.74