Product Details

Die cut LED light silicone thermal conductive heat sink cooling pad

Features&Benefits:

-Thermal conductivity:1.2w/m.k

-Moderate tacky on both sides

-High softness offer high conformability at low stress application

-Electrical isolating

Typical Application:

-Flat panel display

-handheld devices

-Telecommunication

-Mid to high power module

Configurations:

-Sheet form,die-cut parts

-Tape application available

Size available:

200x400mm

Thickness available:

1.0-12.0mm,increment by 0.5mm

Typical Properties of Gap Pad LD8120
Property	Unit	Metric Value	Test Method
Color	***	Light Red	Visual
Thickness	mm	1.0-12.0	ASTM D374
Density	g/cc	2.3	ASTM D792
Hardness	Shore C	15±5	ASTM D2240
Tensile Strength	KN/m	1	ASTM D412
Continuous Use Temp.	°C	-40-150°C	EN 344
Electrical
Breakdown Voltage	Kv/mm	≥6.5	ASTM D149
Volume Resistivity	Ω.cm	3.5×1012	ASTM D257
Flame rating	V-0	V-0	UL 94
Thermal
Thermal Conductivity	W/m.k	1.2	ASTM D5470

Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.

Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.

Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LD8100U,only one side has natural tacky.

Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.

Q:Will the heat make the thermal pads softer?
A: From -60-150,there is no significant change in the hardness of thermal pads, as gap filler.

Q: What’s the tolerance for the thickness?
A :Normally ±10%.

Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.

Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.

Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LD8100U has fiberglass on its surface, all other models will be made at your requirement.