Specifications

1.Good quality
2.Best price
3.Sample free
4.Min 100 meters

bucket elevator conveyor belt

Specifications:

 

1. The carcass in elevator belts is consists of two or more ep plies, rubber covers and with protected edges. Carcass of the elevator belts is consist two or more ep plies of reinforcement that has polyester yarns in the warp (longitudinal) and nylon yarns in the weft (transversal) directions.

 

2. The Belt Jet belts which are abrasion resistant remain supple and elastic throughout use and have a significantly increased life cycle.

 

3. Due to their carcass construction they are known as an "endurance runner" and have proven to be reliable

conveyor belts with a long service life. 

 

Appication:

 

1. Sand, gravel and stone industry

2. Cement, concrete plants

3. Heating stations, power stations, garbage incinerating plants

4. Asphalt mixing plants

5. Recycling, compost, mineral processing plants

6. Timber industry and sawmills

7. Farming, warehousing, silo feeding

8. Docks, ship loading and unloading

9. Sugar refineries, salt mines, potatoes and starch factories

10. Foundries,waste treatment plants

11. Good application capability, running steadly, low maintenance.

 

Characteristics:

 

Confined space, little pollution, great conveying capacity,suitable for conveying bulk material.

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102	Mpa	%	mm3	N/mm       (≤1.5mm)	N/mm (>1.5mm)	N/mm
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

 

 

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm       (≤1.9mm)	N/mm (>1.9mm)	N/mm
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6

 

 

 

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
RMA	Mpa	%	mm3	N/mm   (≤1.6mm)	N/mm (>1.6mm)	N/mm
RMA-I	17	400	200	3	4.4	4
RMA-II	14	400	250	3	4.4	4