Product Details

Chevron Conveyor Belts with an inclined angle up to 40 degrees

Description:

chevron v conveyor belt is used primarily when the angle of incline becomes too steep for a smooth conventional conveyor belt. The belt is fitted with integrally moulded cleats which prevent the material from sliding backwards as would be the case with a smooth surface belt. Different cleat designs allow the carrying of many types of material, from bulk solids to unit loads.

Technical Data of Rubber Cover:

Tensile Strength: ≥10Mpa
Elongation at Break: ≥350%
Adhesive strength between carcass: ≥6.0N/mm
Adhesive strength between cover and carcass: ≥3.0N/mm
Elasticity: ≥32%
Abrasion: ≤200mm3

Features:

1. High tensile strength;
2. Good shock resistant;
3. High adhesion between plies ;
4. Anti-slip;

5. Cleats and top cover rubber are vulcanized integrally;

6. Cleat pattern, angle and pitch are designed elaborately.

Applications:

It's used in quarries, sandpits, cement industry, lime industry, farms, salt mines, mobile crushers, screening equipment.

Types of Chevron Conveyor Belts:

close V type, open V type, C type, U type, Y type and --- type

Type of material	Material example	Max. angle of inclination
		Height of cleats
		H (mm): 14	H (mm): 16	H (mm): 25	H (mm): 32
Powdery	Flour, etc	25°	25°	28°	30°
Loose flowing	Corn, barley, wheat, rye, etc.	20/25°	20/25°	25/30°	25/30°
Loose rolling	Gravel, ground stone, etc.	25°	25°	28°	30°
Packed	Sacks, paper sacks, etc.	30/35°	30/35°	35/40°	35/40°
Sticky	Wet sand, ash, wet loam, etc.	30°	30/35°	35/40°	40/45°