Specifications

Sandy foam latex coated gloves
EN388 - 3.1.4.2
Foam latex palm
Seamless knitting
Breathable sandy palm and knitting back.

Sandy foam latex coated gloves

 

 

 

For protective gloves in certification category I in accordance with the essential requirements of the Directive 89/686/EEC, this has been verified by using following technical rules:

 

• EN 420:2003 - AM1:2009  - General requirements for gloves and test methods
• EN 388:2003                        - Protective glove against mechanical risks
• Directive 2002/61/CE         - This product fulfills the requirements given by the Directive.

 

Performance levels offered against mechanical risks (EN388:2003) are:

 

ABRASION RESISTANCE	BLADE CUT RESISTANCE	TEAR STRENGTH RESISTANCE	PUNCTURE RESISTANCE
3	1	4	2

 

 

 

Item no.: FS913

 

 

 

Description

 

Sandy foam latex dipped palm and fingertips with seamless 13 gauge knitting shell.

 

 

 

Origin of Place: Qingdao China

 

 

 

Cleaning and maintenance:

 

New and used gloves should be checked for defects before use, in particular after cleaning.

 

Any soiling of the gloves should be brushed or washed off first.

 

Then wash with a mild soap, rinse in clear water and air-dry.

 

 

 

In the event of heavy soiling of the gloves, avoid contact with the skin. The aforementioned performance ratings are based on the testing of unused gloves. Corresponding testing needs to be carried out in order for results to be applied to the gloves after treatment.

 

                       

 

Packing and storage

 

The gloves are packed together with consumer information

 

The gloves are packed in corrugated fiberboard packaging which is suitable for transportation and storage.

 

Store in cool, dry and ventilated place and protect from UV radiation.

 

 

 

Ageing:

 

If store correctly, the gloves will be resistant to ageing for up to 3 years

 

Temperature: less than 50°C