 | | GOOD NEWS: Our SERVO DRIVER EP1C, EP1C-A & EP3 could be set parameter by English Edition Servo Software. And it could be used on 32bits & 64bits system. With the coming of Christmas, there is a Big Promotion in our company to feedback you. | Introduction of Servo Motor 130MSL10025F | | Name | servo motor | | Model | 130MSL10025F | | Rated Power | 2600w | | Rated Line Voltage | 3 phase 220VAC | | Rated Line Current | 10.0A | | Rated Speed | 2500rpm | | Rated Torque | 10.0Nm | | Peak Torque | 25.0Nm | | Rotor Inertia | 1.94*10-3 kg·m2 | | Lines of Encoder | 2500ppr | | Motor Insulation Class | ClassB(130°C) | | Operating Environment | Temperature: -20°C ~ +50°C; humidity: relative humidity (RH)<90% (not including condensing condition) |
|
|
Introduction of EP1C Specification | Model | TL05F | TL10F | TL15F | TL25F | TL35F | TL55F | | Input Power | 3-phase AC220V -15% ~ +10% 50/60Hz | | Environment | Temperature | Working: 0°C~ 40°C Storing: -40°C~ 50°C | | Humidity | Working:40% ~ 80%(non condensing) Storing:under 93%(non condensing ) | | Atmospheric Pressure | 86kPa ~ 106 kPa | | Protection Level | IP20 | | Control Mode | vector control | | Regenerative Braking | Built-in/Built-out | | Feedback Mode | 2500 line incremental encoder,encoder with fewer lines | | Control Mode | Position | | Digital input | 5 Programmable input terminals(Optical Isolation) Function:SRVON ,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque inhibition,CCW Torque inhibition,Emergency Stop,Electronic gear selection 1,electronic gear selection2,Position deviation clear,pulse input inhibition | | Digital Output | 3 Programmable input terminals(Optical Isolation) Function:SRDY ,alarm,Finish Orientation Output ,Reach Speed ,electro-magnetic brake,Torque restrictions | | Signal Output of encoder | Signal Types | A,B,Z Differential output,Z signal open-collector output | | Position | Input Frequency | differential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps) | | instruction mode | Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse | | Electronic Gear Ratio | 1 ~ 32767/1 ~ 32767 | | Surveillance Function | Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc. | | Defensive function | Overspeed,Overvoltage,Overcurrent,Overload,Abnormal of main Power,Abnormal Encoder,out of tolerance etc. | | Feature | Speed Frequency Response | ≥300Hz | | Speed Fluctuation Rate | <±0.03%(load 0 ~ 100%); <±0.02%(power-15% +10%) | | Speed Ratio | 1:5000 |
Introduction of EP1C-TL25F model
Introduction of EP1C Size
|