AC Servo Drive, buy 3.0kw analog control ac servo driver on China Suppliers Mobile

Product Details

Specifications

1' 220V AC 50hz 3 phase
2' Pulse and analog control
3' rated power 3.0kw
4' USB interface, MODBUS
5' CE, ISO, TUV

3.0kw analog control ac servo driver

Product Introduction

Product models

GL series:GL1A0/GL3A0/GL7A5/GL120/GL160/GL190/GL240

GH series:GH3A5/GH5A4/GH8A5/GH130/GH170

Designed and produced by market demand, EP3 series Multifunctional AC Servo Driver adopts advanced control algorithm and intelligent power module (IPM), which could realize precise digital control on torque speed and position.Designed on the basis of EP2 series, functions of USB Interfaces , sustaining Modbus agreement and internal simple PLC are added. This series includes 3phrase 220V series and 3hrase 380V series. The feedback mode is 2500 line incremental encoder or 17 bit absolute encoder, which could support 16 bit current sampling and 16 bit external analogue sampling accuracy. Thus, it owns advantages of strong overload capacity,fast response, easy operation without setting driver code. The selected exquisiteoperation panel could do therealtime monitor and adjust the operating situation ofmotors. Designed on the reliability requirement of domestic industrial environment, it helps to make the stability of productsreliable.

Introduction of EP3 Models

Introduction of EP3 Size

Note: EP3 series has different appearance depend on different models. Please see the details on related use manual.

Detailed parameter of EP3 series

Model

GL 1A0

GL 3A0

GL 7A5

GL 120

GL 160

GL 190

GL 240

GH3A5

GH 5A4

GH 8A5

GH 130

GH 170

Rated output Power(kW)

0.1

0.4

1.5

Rated output current(A)

7.5

3.5

5.4

8.5

Input power

Main supply

1-phase 220VAC -15%~+10% 50/60Hz

3-phase 220VAC -15%
+10% 50/60Hz

3-phase 380VAC -15%~+10% 50/60Hz

Control supply

1-phase 220VAC-15%~+10% 50/60Hz

24VDC±15% ≥1.5A

Environment

Temperature

Working:0°C~ 40°C Storing:-40°C~ 50°C

Humidity

Working:40% ~ 80%(non condensing) Storing:under 93%(non condensing )

Atmospheric Pressure

86kPa ~ 106 kPa

Protection Level

IP20

Control Mode

vector control

Regenerative Braking

Built-in/built-out

built-out

Feedback Mode

2500 line incremental encoder or 17 bit absolute encoder

Control Mode

Position, speed, torque, position/ speed,speed/torque,position/torque

Digital input

5 Programmable input terminals(Optical Isolation)

Digital Output

3 Programmable input terminals(Optical Isolation)

Position

Input Frequency

differential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps)

instruction mode

Pulse+Signal,CCW Pulse/CW Pulse, Two-phase A/ orthogonal Pulse

Electronic Gear Ratio

1 ~ 32767/1 ~ 32767

Speed

Simulation command input

-10V ~ +10V,input impedance10kΩ

Instructions Acceleration And Deceleration

Parameters set

Instructions source

analog,Internal speed instructions

Torque

Simulation command input

-10V ~ +10V,input impedance10kΩ

Speed restriction

Parameters set

Instructions source

analog,Internal torque instructions

Special Functions

ZRN ,Gain switch,mechanical resonance wave trap, sustaining Modbus agreement

Surveillance Function

Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc.

Defensive function

Overspeed,Overvoltage,Overcurrent,Overload,Abnormal brake,Abnormal Encoder,out of tolerance etc.

Feature

Speed Frequency Response

≥300Hz

Speed Fluctuation Rate

<±0.03%(load 0 ~ 100%); <±0.02%(power-15% +10%)

Speed Ratio

3.513889

Other pictures