Lithium Rechargeable E Scooter Battery 48V
Negotiable /Piece
Min.Order:10 Pieces
Shenzhen Honghaosheng Electronics Co., Ltd.
Electric battery widely used in
Electric Cars,Electric Bicycles,Solar Energy,Toys and so on as Mobile Power Supply.
36V 10AH Electric battery specifications
Specification | 36V 10Ah electric battery for electric bike |
Type | Lithium-ion polymer rechargeable cell |
Model | Electric battery |
Nominal voltage | 36V |
Nominal capacity | 10Ah |
discharge from 48V to39.0V at 0.2C mA | |
Minimal capacity | 10Ah |
Max charge current | 10000 mA 1C |
Charging method | charge with constant current 1C to 48V, then charge with constant voltage 48V till charge current is less than 0.01C |
Max discharge current | 10000 mA 1C |
Discharge cut-off voltage | 39.0 V, the over-discharge detection voltage of PCM |
Operating environment | Charging, 0°C ~ 45°C ; 65±20%RH |
Discharging, -20°C~60°C ; 65±20%RH | |
Storage environment | -20°C~45°C 65±20%RH |
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH; | |
Cell Weight (Approx) | 15kg |
Cell Dimension (Max) | Thickness × Width × Length (mm) customize |
Electrical characteristics | Electric battery |
Full charge | charge with constant current 1C to 48V, then charge with constant voltage 48V, till charge current is less than 0.01C |
Initial capacity >10Ah | The capacity means the discharge capacity of the cell that was discharged to 3.0V with discharge current of 0.2C within one hour after the full charge. |
Cycle life | Cycle life is the capacity of the cell that was repeated 300 cycles with full charge and then discharging to with discharge current of 1C. |
Initial impedance < 80 mΩ | Cell resistance was measured at AC 1KHz after 50% charge and the test temperature was 25°C. |
Charging | Charging current and charging voltage should be less than specified in the Product Specification. The charger shall be designed to comply with Product Specification. It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance. |
warranty | Period of warranty:36 months after sales Range of warranty: There is low voltage, expansion or leakage with the correct use of the cell in the period of warranty. |
Identification | Warnings would better be marked on the surface of the battery which is tied up by certain cells *Using the charger designated by the manufacture(AEC). *Don't throw the battery in fire or heat it. *Don't short-circuit. *Don't unpack the battery or change its structure. |
Pack design | * Battery pack should have sufficient strength and battery should be protected from mechanical shock * No cell movement in the battery pack should be allowed. * No Sharp edge components should be inside the pack containing the battery. |
Warnings | 1.Don't throw the cell in fire or heat it or store it in high temperature place. 2.Don't fix the positive and negative of the cell reversely to the electrical equipment. 3.Don't connect the positive and negative polarities by metallic conductor such as a metallic wire. 4.Don't stab it with a needle,beating,treading or other way. 5.Keep the cell sealed. 6.Don't unpack the battery or change its structure. 7.Don't throw the cell in water,please keep it from humidity. |
Electric bike battery related product pictures