Specifications

1) YAG Laser Marking Machine
2) 100*100/150*150/200*200mm
3) galvanometer scanning system
4) Long continuous working hours

 Equipment Parameters

Model: QX-YAG50

Laser Wavelength: 1064nm

Beam Quality: m2<10

Laser Repetition Rate: ≤50KHz

StandardMarking Range: 100*100/150*150/200*200mm

Engraving Depth: 0.3 mm (adjustable depending on materials)

Engraving Linear Speed: ≤7000mm/s

Minimum Line Width: 0.025mm

Smallest Character: 0.3mm

Repeatability: 0.005mm

Machine Power: ≤5Kw

Power Required: 380V/50Hz/20A

Cooling Mode: with an embedded circulating water chiller

Machine Features:

1)The lamp-pumped laser marking machine is one of the earliest used laser marking devices with the most extensive applications and the highest technical maturity.

2)The lamp-pumped Nd: YAG laser emits light with a wavelength of 1064 nm in the infrared spectrum. Having the advantages of high output power and consistent performance, it is one of the most extensively used solid-state lasers with the highest technical maturity;

3)The lamp-pumped Nd: YAG laser uses krypton lamps as energy source (excitation source) and takes Nd: YAG as lasing medium (working substance). The excitation source emits light with a specific wavelength to drive the working substance to output doubled or tripled power and then to generate laser light. When the power of the laser light is multiplied, light beam is formed for marking purpose.  

 Product Features

1) High laser power, and the power level can be continuously adjusted by current level and the control software;

2)Involve a galvanometer scanning system featuring high speed, high precision and consistent performance;

3)The control software can automatically generate serial numbers and bar codes.

4)Low purchase cost and low marking cost, with no consumables required such as ink;

5) Long continuous working hours

Applicable Fields

1)Auto parts: pistons, piston rings, gears, shafts, bearings, clutches and lights;

2)Electronic components: resistors, capacitors, chips, printed circuit boards and keyboards;

3)Basic mechanical components: bearings, gears, standard parts and motors;

 4)Instruments: panels, signs and precision instruments;

5) Hardware tools: knives, tools and measuring tools;

6)Daily necessities: crafts, zippers, leather clothing and sanitary ware.