chemical Stainless Steel powder mixer with double shaft
Product description
1. Description of horizontal ribbon mixer:
1) Horizontal ribbon mixer consists of U-shaped containers, ribbon mixing blade and transmission components.
2) The ribbon including continuous and disconnect.
3) The helical ribbon blade is made of a double or triple outer spiral the mateial from both sidesbrings together the central inner spiral the material transported from teh center to the sides to form a stream mixed.
2. Working performance:
1) Adding a liquid and pasty materials mixed in the ribbon mixer for viscous of cohesive ganule mixing and granule has a good effect, cylinder cover can be made of a wide-open door, so that the equipment for cleaning.
2) Can be added to the mixer barrel outer jacket, cooling or heating of the material is achieved by injecting the cooling medium to the jacket.
3) Discharge in the form of a phenomenon of material accumulation and mixing dead ends, reliable trim seal, frequent switching lakage.
3. Technical parameters of horizontal ribbon mixer:
Model | Volume (L) | loading coefficient | Motor power (KW) | Speed (rpm) | Remark |
WLDH-0.5 | 500 | 0.4 ~ 0.6 | 4 ~ 7.5 | 42 | Data in this table for reference, teh actual data according to specific proccess requirements, material viscosity, and other design.
|
WLDH- 1 | 1000 | 0.4 ~ 0.6 | 5.5 ~ 11 | 42 | |
WLDH- 2 | 2000 | 0.4 ~ 0.6 | 11 ~ 15 | 42 | |
WLDH- 3 | 3000 | 0.4 ~ 0.6 | 15 ~ 18.5 | 42 | |
WLDH- 4 | 4000 | 0.4 ~ 0.6 | 18 ~ 30 | 42 | |
WLDH- 5 | 5000 | 0.4 ~ 0.6 | 22 ~ 37 | 42 | |
WLDH- 6 | 6000 | 0.4 ~ 0.6 | 30 ~ 45 | 42 | |
WLDH- 8 | 8000 | 0.4 ~ 0.6 | 37 ~ 55 | 42 | |
WLDH- 10 | 10000 | 0.4 ~ 0.6 | 45 ~ 55 | 42 | |
WLDH- 12 | 12000 | 0.4 ~ 0.6 | 45 ~ 75 | 42 | |
WLDH- 15 | 15000 | 0.4 ~ 0.6 | 55 ~ 90 | 42 |
3. the picture of horizontal ribbon mixer :
1. Discreption of conical twin screw mixer:
1) Conical twin screw with mixing machine mixing components for two asymmetrical cantilever screw, they around its axis of rotation (rotation) and at the same time, also around the conical container center shaft, with the help of a jib rotating in the cone surface of planetary motion (revolution).
2) The equipment through the revolution of the screw, rotation so materials again and again, to produce shear in the cone, convection, diffusion, etc compound movement, so as to achieve mixed purposes.
3) Products can be designed according to the outer jacket (heating, cooling), spray, etc.
4) Widely used in chemical, pharmaceutical, pesticide, pigment, building materials, such as powder mixed with powder.
5) DSH-0.1 mean 0.1m3 , 0.1m3 mean the volume 100L.
6) the mixing machine the touch material part make from stainless steel 304.
7) If you need more requirement , we can according to your require to design.
2. Technical parameters
type | design volume (L) | loading volume | motive power | discharge method | other require |
DSH-0.1 | 100 | 60 | 1.1 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-0.3 | 300 | 180 | 1.5 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-05 | 500 | 300 | 2.2 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-1 | 1000 | 600 | 3-4 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-2 | 2000 | 1200 | 5.5-7.5 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-3 | 3000 | 1800 | 5.5-7.5 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-5 | 5000 | 3000 | 11-15 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-6 | 6000 | 3600 | 15-18.5 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-8 | 8000 | 4800 | 18.5-22 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
DSH-10 | 10000 | 6000 | 22-30 | Displacement at the bottom of the valve or butterfly valve | Can design according to the jacket, the atomizer |
3.The picture of conical twin-screw mixer
About us
1.Introduction
1) Foshan JCT Machinery Co., Ltd formed at 2005, with 4,000 square meters factory. Professional R&D department with engineers of 20 years experiences, specialize in producing various types of blending, mixing, kneading, dispersing and response machines.
2) From 2009 our company open the door to overseas market. Now, we have stepped in Europe, Africa, the Middle East, South America and South Asia.
3) Any clients from the world are welcome.
2.Why choose us?
1). Profession:
We have focused on this area for over 10 years, and the boss of JCT is a professional engineer who has 20 years’ experience in what we are concentrating on!
2). Powerful team:
A 5-experienced-engineer designing team + a 35-skilled-technician team + a 10-passionate-sales team make up the JCT big team.
3). Achievement:
JCT was set up at 2004, through about 10 years’ endeavor, our products has been sold to most important industrial district in China, such as Guangdong, Shangdong, Jiangsu, Zhejiang, Fujian and so on. And we have edged ourselves into the top 5 in China. From 2009, JCT started the international marketing. Now, we have set our feet in North America, Europe, South Aria, Africa etc.
Some of the JCT's certificates and official documents.
3.customer survices
- 18 months' free of charge warranty for all of our machines except of the pipes, valves, pumps etc
- Customer request for product modificationor new product development are invited.
- 24 hours technical support by Email, Skype, Mobile-phone
- Engineers are available to overseas for technical support or producing guidance.
- Original manufacturers' price for quick-wear parts of our machines.
4.Contact us