Product Details

powder mixer

1. Description of horizontal ribbon mixer:

1) Horizontal ribbon mixer consists of U-shaped containers, ribbon mixing blade and transmission components.

2) The ribbon including continuous and disconnect.

3) The helical ribbon blade is made of a double or triple outer spiral the mateial from both sidesbrings together the central inner spiral the material transported from teh center to the sides to form a stream mixed.

2. Working performance:

1) Adding a liquid and pasty materials mixed in the ribbon mixer for viscous of cohesive ganule mixing and granule has a good effect, cylinder cover can be made of a wide-open door, so that the equipment for cleaning.

2) Can be added to the mixer barrel outer jacket, cooling or heating of the material is achieved by injecting the cooling medium to the jacket.

3) Discharge in the form of a phenomenon of material accumulation and mixing dead ends, reliable trim seal, frequent switching lakage.

horizontal ribbon mixer

We can design it as your requirement.

3. Technical parameters of horizontal ribbon mixer:

Model	Volume (L)	loading coefficient	Motor power (KW)	Speed (rpm)	Remark
WLDH-0.5	500	0.4 ~ 0.6	4 ~ 7.5	42	Data in this table for reference, teh actual data according to specific proccess requirements, material viscosity, and other design.
WLDH- 1	1000	0.4 ~ 0.6	5.5 ~ 11	42
WLDH- 2	2000	0.4 ~ 0.6	11 ~ 15	42
WLDH- 3	3000	0.4 ~ 0.6	15 ~ 18.5	42
WLDH- 4	4000	0.4 ~ 0.6	18 ~ 30	42
WLDH- 5	5000	0.4 ~ 0.6	22 ~ 37	42
WLDH- 6	6000	0.4 ~ 0.6	30 ~ 45	42
WLDH- 8	8000	0.4 ~ 0.6	37 ~ 55	42
WLDH- 10	10000	0.4 ~ 0.6	45 ~ 55	42
WLDH- 12	12000	0.4 ~ 0.6	45 ~ 75	42
WLDH- 15	15000	0.4 ~ 0.6	55 ~ 90	42

horizontal ribbon mixer

3. the picture of horizontal ribbon mixer :

horizontal ribbon mixer

1. Discreption of conical twin screw mixer:

1) Conical twin screw with mixing machine mixing components for two asymmetrical cantilever screw, they around its axis of rotation (rotation) and at the same time, also around the conical container center shaft, with the help of a jib rotating in the cone surface of planetary motion (revolution).

2) The equipment through the revolution of the screw, rotation so materials again and again, to produce shear in the cone, convection, diffusion, etc compound movement, so as to achieve mixed purposes.

3) Products can be designed according to the outer jacket (heating, cooling), spray, etc.

4) Widely used in chemical, pharmaceutical, pesticide, pigment, building materials, such as powder mixed with powder.

5) DSH-0.1 mean 0.1m3 , 0.1m3 mean the volume 100L.

6) the mixing machine the touch material part make from stainless steel 304.

7) If you need more requirement , we can according to your require to design.

2. Technicalparameters

type	design volume (L)	loading volume	motive power	discharge method	other require
DSH-0.1	100	60	1.1	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-0.3	300	180	1.5	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-05	500	300	2.2	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-1	1000	600	3-4	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-2	2000	1200	5.5-7.5	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-3	3000	1800	5.5-7.5	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-5	5000	3000	11-15	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-6	6000	3600	15-18.5	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-8	8000	4800	18.5-22	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer
DSH-10	10000	6000	22-30	Displacement at the bottom of the valve or butterfly valve	Can design according to the jacket, the atomizer

horizontal ribbon mixer

About us:

horizontal ribbon mixer

Why choose us?

1). Profession:

We have focused on this area for over 10 years, and the boss of JCT is a professional engineer who has 20 years’ experience in what we are concentrating on!

2). Powerful team:

A 5-experienced-engineer designing team + a 35-skilled-technician team + a 10-passionate-sales team make up the JCT big team.

3). Achievement:

JCT was set up at 2004, through about 10 years’ endeavor, our products has been sold to most important industrial district in China, such as Guangdong, Shangdong, Jiangsu, Zhejiang, Fujian and so on. And we have edged ourselves into the top 5 in China.

From 2009, JCT started the international marketing. Now, we have set our feet in North America, Europe, South Aria, Africa etc.

Our credo - "QUALITY and SERVICE first, PROFIT second!"

Our mission- to serve you better and try our best to establish a win-win situation with you!

Jacketed Heating Vacuum Kneading Machine (NHZ-600)

Products range

1) Chemicals

Adhesive (hot melt adhesive, grafted adhesive, white glue, glass glue, wood glue etc.)

Resin (alkyd resin, acrylic resin, epoxy resin, ABS resin etc.)

Paint (water-based paint, oil-based paint)

Rubber (compound rubber, htv rubber, silicone rubber, RTV rubber, rubber sheet etc.)

Sealant (silicone sealant, glass cement, PU sealant, car sealant, building sealant etc.)

CMC (industrial-grade CMC, food-grade CMC.)

2) Food industries

Gum (bubble gum, chewing gum).

Candy (all kinds of soft candy, chocolate etc.)

Ice cream.

Syrup (honey siryp, suger syrup, golden syrup).

Fruit juice.

Milk product (diary product, milk mixture).

3) Pharmaceuticals

4) Cosmetics

5) Others

High-viscosity liquid product, powder mixtures, high-temperature mixtures

Why choose us?

1). Profession:

We have focused on this area for over 10 years, and the boss of JCT is a professional engineer who has 20 years’ experience in what we are concentrating on!

2). Powerful team:

A 5-experienced-engineer designing team + a 35-skilled-technician team + a 10-passionate-sales team make up the JCT big team.

3). Achievement:

From 2009, JCT started the international marketing. Now, we have set our feet in North America, Europe, South Aria, Africa etc.

horizontal ribbon mixer

Some of the JCT's certificates and official documents.

horizontal ribbon mixer

Contact information