Specifications

raw material for paint industry making machine
1.Whole line
2.Automatic, high-efficient
3.mix, mill, color, pack
4.CE, SGS

raw material for paint industry making machine

 

raw material for paint industry

 

1.Introduction of the paint machine

  raw material for paint industry making machine

 

I. High Speed reaction vessel

The high speed reaction vessel is especially used in making all kinds of paint, the quality of paint that made by this type of machine is much better than the high speed disperser.

And this type of machine are widely used by manufaturers who aim at high-end paint market and large output. 

 

 

 

Main features:

- Very hug capacity.

- Siemens or  ABB motor.

- Siemens/LG//Danfoss Frenquency conventor optional.

- Anti-explosion system for motor and control box.

- Very high-degree vacuum and high pressure.

- Frequency control for the mixing speed.

- Sealed very well, which is very good for the quality of paint.

 

Technical Parameters:

TYPE	POWER (kW)	Speed (rpm)	Plate (mm)	Paint type	Tank volume (L)	Weight (Kg)	Size (mm)
							Diameter	Height
FYF-1000	18.5	0~1800	250	Water & oil based	1000	1000	1400	2400
FYF-2000	22	0~1800	300	Water & oil based	2000	1400	1500	2800
FYF-3000	30	0~1800	350	Water & oil based	3000	1700	1600	3000
FYF-4000	37	0~1800	350	Water & oil based	4000	2000	1800	3000
FYF-5000	37	0~1800	400	Water & oil based	5000	2500	2000	3200
FYF-8000	45	0~1600	450	Water & oil based	8000	3500	2200	3800
FYF-10000	55	0~1600	550	Water & oil based	10000	4200	2400	4000

 

Paint mixing machine

 

The paint plant of JCT's client

 

II. High Speed Disperser

This type of machine is the most widely used machine for making paint nowadays, it can make almost all kinds of paints that used to paint wall, car, furniture, floor and some other things . 

 

 

 

- Hydraulic lifting system for machine movement;

- Siemens or  ABB motor;

- Siemens/LG//Danfoss Frenquency conventor optional;

- Anti-explosion system for motor and control box.

- Vacuum and high-pressure are available.

- Frequency control for the mixing speed.

- Easy to handle and control.

 raw material for paint industry making machine

Technical Parameters:

TYPE	POWER (kW)	Speed (rpm)	Plate (mm)	Lift travel (mm)	Pump power (kW)	Tank volume (L)	Weight (Kg)	Size (mm)
								A	B	C
GF-1.5	1.5	0~1450	150	600	0.55	50	120	1400	940	350
GF-4	4	0~1450	200	800	0.55	200	400	1700	1300	600
GF-11	11	0~1450	250	900	0.55	400~600	800	1750	1800	900
GF-22	22	0~1450	350	1200	0.75	600~1000	1500	2200	2100	1100
GF-37	37	0~1200	400	1200	0.75	1000~2000	1700	2200	2100	1100
GF-45	45	0~1200	450	1600	1.1	1000~2500	2100	2600	2700	1400
GF-90	90	0~1200	600	1600	2.2	5000	2600	2700	3000	1600
GF-132	132	0~1200	610	2200	4	10000	4500	3800	3800	1800

 

 

 

2. Specific description of paint mixing machine

paint mixing machine 

 

 

 

 

 

Q: Can you send the formula for the products we want to make?

A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.

 

Q: Do you have machines in stock?

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.

 

Q: Can you send the detailed drawings of the machine to us before we place order?

A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.

 

Q: Why does it take at least 20 days to finish the machine?

A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.

 

Q: Can we pay the balance after we receive the machines and test without problems?

A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment. 

 

Q: If you price is higher than the suppliers for the products that are not made by you?

A: We can provide the whole production lines, which include many facilities and accessories(like Oil furnace, steam boiler, etc). It's impossible for us to make everyone of them, because we just make the main machines. However, based on our great reputation in the business, and also considering our huge sourcing quantity by collecting the orders from domestic and foreign customers, and our strong cash flow to pay the suppliers in advance. We can get the best offer from the suppliers. So after adding an reasonable profit for the outsourcing facilities and accessories (like Oil furnace, steam boiler, etc), we still can offer a very competitive price similar to our suppliers, or even lower in some case. 

  

 

3. Packing

  

 6. About our company

1). Foshan JCT Machinery Co., Ltd. (  or  http://fsjct.en.china.cn)

 

2). Professional manufacturer for chemical machineries, with 13 years' rich experience in this field.

 

3). JCT specializes in all kinds of reactors, mixers, kneaders, dispersers and some filling machines and extruders etc. And the machines are widely used in all kinds of adhesives, resins, rubbers, paints, sealants, chemicals, emulsions and some food and pharmaceutical industries. 

 

4). JCT Machinery Co., Ltd was formally set up at 2003, but the origianl entrepreneur team are all very professional engineers who were with 20 years' experience. 

 

5). JCT's main markets: China, Europe, Africa, Middle East, South America and South Asia, we can sell machines to anywhere as long as it needs.

 

2. Why choose us?

Certificates 

color mixing machine

Our company and factory

paint mixing machine

 

7. Contact information

 

paint mixing machine