Product Details

2015 Automatic Car Paints Mixing Machine

Car Paints Mixing Machine

Car Paints Mixing Machine Car Paints Mixing Machine

Car Paints Mixing Machine

Introduction of dispersion machine

1) There are three to four different types of mixers, one in the kettle body runs around the axis, the other two rotate around its own axis in the different high speed.Material in the kettle crashes intricately

and strongly sheared and rubbed.Yamagata blade in the tank runs around the axis, can scrape the

material glued to the wall and bottom to join into the mixing, so the effect is more ideal.

2) Kettle has special seal structure to vacuum, so that the exhaust can be well expelled.

Discharging way is pressure fed, cover lifts by hydraulic, and cylinder is free to move, which is easy

to operate.

4) It is widely used in adhesive, cosmetics, chemical products, batteries, food, pharmaceutical and plastics

industries and other industries.

5) The stirrer types including multilayer paddle, frame, butterfly, impeller type.

Technical parameters of dispersion machine:

Model	Volume (L)	Drive Motor Power (KW)		Drive Motor Power (KW)		Vacuum Degree (MPa)	Remarks
Model	Volume (L)	Stir	Dispersion	Stir	Dispersion	Vacuum Degree (MPa)	Remarks
QF-5	2	1.1	1.1	22.3	0 - 1450	-0.098	The data in this table is only for reference, the actual data can be designed as the detailed requirements and needs. Or decided by the material viscosity and other requirements.
QF-20	3	2.2	2.2*2	22.3	0 - 1450
QF-50	20	202	3*2	22.3	0 - 1000
QF-100	50	3	4*2	22.3	0 - 1000
QF-200	100	4	5.5*2	22.3	0 - 1000
QF-300	200	5.5	11*2	22.3	0 - 1000
QF-500	300	11	15*2	22.3	0 - 1000
QF-1000	500	15	22*2	22.3	0 - 1000
1). Lifting mode: Hydraulic lift and descend. 2). Heating or cooling can be designed as needs. 3). The pressure range: -0.1 ~ 0.3 MPa 4). Speed control mode: inverter for frequency control

Car Paints Mixing Machine

Details of Dispersion Machine:

Car Paints Mixing Machine

Applied Range:

Car Paints Mixing Machine

Packaging&Shipping:

Car Paints Mixing Machine

FAQ:

Q: Can you send the formula for the products we want to make?

A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.

Q: Do you have machines in stock?

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.

Q: Can you send the detailed drawings of the machine to us before we place order?

A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.

Q: Why does it take at least 20 days to finish the machine?

A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.

Q: Can we pay the balance after we receive the machines and test without problems?

A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment.

Q: If you price is higher than the suppliers for the products that are not made by you?

A: We can provide the whole production lines, which include many facilities and accessories(like Oil furnace, steam boiler, etc). It's impossible for us to make everyone of them, because we just make the main machines. However, based on our great reputation in the business, and also considering our huge sourcing quantity by collecting the orders from domestic and foreign customers, and our strong cash flow to pay the suppliers in advance. We can get the best offer from the suppliers. So after adding an reasonable profit for the outsourcing facilities and accessories (like Oil furnace, steam boiler, etc), we still can offer a very competitive price similar to our suppliers, or even lower in some case.

Company Information:

About us:

1)The company build in 2006, now there are about 50 people work for it.

2)Our credo is: JCT —— your truthful partner in China.

We are strive to become the leader in this industry and produce the world-class mixing equipment.

3)Our products including reactor, kneader, planetary mixer, power mixer etc, and can be used for resins, adhesives, paint, sealants and powder mixing etc.

4)Our products have exported to Ethiopia, Saudi Arabia, Japan, India, Russia, Sudan, Italy etc.

WHY CHOOSE US :

Professional Sales Team & Technology Support & Strict Processing Workshop

Car Paints Mixing Machine

Some of Our Clients: Car Paints Mixing Machine

Car Paints Mixing Machine

Certificates:

Car Paints Mixing Machine

Contact Information:

[CHOOSE WHAT YOU NEED AND CONTACT US AT ANY TIME!]

Tel:0086-1 813 837 3960

QQ:2108375241