Specifications

1.19 years of experience in blow molding machine
2.Deflashing system
3.Famous brand component parts
4.CE
5. 2 years warranty

 TONVA TVD-5L/II (up to 6 Layer)  Model blow molding machine:

 

 

 

Blowing technology:

 

Main Characteristic:

  

1.  Two station, Multiple layer, 80mm screw, 22kw motor, PE / PP etc.

2.  Power supply: 380VAC, 50Hz  (depending on client's county ).

3.  Die Head for choosing:

     One die head (2L-5L): 5L   around 180 bottles per hour

     Two die head (1L-2L): 2L   around 600 bottles per hour

     Three die head(500ml-1L): 1L   around 1200 bottles per hour

      Four die head(up to 500ml): 500ml around 2000 bottles per hour

4. Center Distance:

    Two Die head: 180mm,    Three Die head: 100mm,   Four Die head: 60mm

5.  Deflashing system: rolling cutter and bottom deflash / pushing device

  

Deflashing Device:

A. one desing of deflashing(rolling  knife)

B. another desing of  deflashing(punching knife)

 

Basic working theory:

  

This kind of machine is using PLC control system, operating manual in English, pneumatic operated, clamping by hydraulic cylinders actuated by pneumatic primary cylinders. Moreover, it equips with deflashing system, resulting in saving time and manual cost for clients.

 

Our machine adopts famous brand in most component parts, almost from GERMANY, JAPAN, FRANCE, TAIWAN 

  

 Electirc system:

 

PLC control:

 

Technical Specification:

 

Item	Unit	Parameter
Raw Material	-	PE/PP/PVC/EVA...
Diameter of primary screw	mm	80
Diameter of secondary screw	mm	35
L/D of primary screw	-	25:1
L/D of secondary screw	-	25:1
Extrusion Power of primary screw	KW	22
Extrusion Power of secondary screw	KW	2.2*2
Heating Power of primary screw	KW	16
Heating Power of secondary screw	KW	4.5*2
Heating Zones	piece	6
Plasticizing Capacity	kg	80
Moulds	piece	2
Mould thickness	mm	160~200
Open stroke	mm	200
Mould length	mm	150~350
Max. Clamping Force	KN	60
Molding Head	piece	1-6
Pressure of air source	Mpa	0.7
Air consumption	m3/min	0.8
Water Consumption	m3/h	1.5
Weight	T	4.2
Dimention	m	3.3*2.1*1.8

 

Packing for machine:

 

Packing for mould: