Specifications

Advanced Solar Mole Repeller with LED lamp
1.Solar panel power: 4V/45MA
2.Solar panels Dimensions: 70X90MM
3.Height: 340mm

 

                                   

Solar mole repeller device powered by solar energy, making use of sound waves to repel harmful rodents(moles,voles,etc.)

By emitting sound waves, the Solar Mole Repeller drives away underground rodents very effectively. The sound waves will irritate them, simulate danger, and repel them away from the irradiated area.Work power can insolation one day then continue works 3 cloudy days).The LED light with AEI(Automatic Identificatien system) will power on when less light and continue work 4 hours,brighten your garden in the same time do not interfere with the wok for mole repeller.The Solar Mole Repeller with LED light which is effective within an area of 650 square meters.

The Solar Mole Repeller radiates in all directions. Avoid any obstruction and let the sound waves be emitted freely. To make the best use of the product, we strongly recommend an installation of 2 devices at every 30 meters for ground areas frequented by rodents.

The Solar Mole Repeller is supplied by a solar cell, a rechargeable accumulator collecting power for operation at night. When the accumulator is fully charged, it can supply enough power for the dark hours, thus ensuring a continuous around-the-clock operation.

 

Technical data:

Solar panel power: 4V/45MA
Solar panels Dimensions: 70 × 90MM
Rechargeable Battery: 1 × 1.2V/800mAH "AA" Ni-Cd or Ni-MH
Charging current: ambient light 90000LUX the charge current greater than or equal to 45MA
Material: ABS & Aluminum
Height: 340mm
Max diameter: 155mm
Installation: Ground Installationg

Please note:

First, check the ground surface before using it. Frozen soil, irrigated or waterlogged ground is not suitable. Dig a hole into solid earth to place the device. The density of the soil will greatly affect the effectiveness of the device. The more solid the earth, the better the device will be functioning.

No hammer should be used in installation.

No excessive force should be applied lest the device be damaged.

 

Installation:

1.Connect the two cable line together,

2. tighten can not depart easily(please refer to the following illustration).

3. Fix the bar and the top together.

4.Insert the bar into the earth, be careful not to use excessive force lest the device be damaged, or bump into any obstruction.

 

 WARNING

1. The base of the top shall be exposed to the outside, according to the terrain varies ensure the water does not exceed the safe line (note illustration).

2.  Before first use,you’d better insolation the solar panel for two days,then connect the cable 2 and insert into the earth,so you will have better effective.