RFID Card Reader for Access Control System 

Xpo-109D

Xpo-109C

125KHz

13.56MHz

Wiegand 26 standard, Wiegand34bits/ RS232 can be customized

Less than 0.2 second Response Speed

3-10cm Proximity Range

Ambient Temperature:-25°C to 75°C

Ambient Humidity: 10%-90%

Built-in Antenna

Built-in LED (Double Color LED)

Built-in Loud Speaker (Buzzer)

Built-in Loud Speaker (Buzzer)

100 Meters Communication Distance

Real Time Data Transfer

PVC Case Mate

With Outdoor Water-Proof Function

Audiovisual indication: When a registered card is presented to the reader, the red LED flashes green and the beep sounds.

  124*76*23.5(mm)

• When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data. 

• Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply.

• When external Power is used, make sure sharing the power with Controller Box or using the same GND.

• When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.