• Since 2008
• Factory area over 40000m2
• Starff over 260 employees
• Technicians over 100 people
• website 

3. Advantage 

• Advanced configuration keep accurate ans stable working condition under high speed working speed
• High generalization, easy maintenance, low maintenance cost.
• Economical, low operating cost
• Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
• Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
• Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.
• Suitable for differnt concentration methane and propane, variety of quality gas.
• Precise air-fuel ratio rarefied combustion control and Generator speed/load control
• Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

4. High Configuration

• Ignition system:  ALTRONIC(USA)
• Starting system: DC24V electric motor. 
• Mixer: IMPCO(USA)  
• Sparking plug:STITT
• Engine Control System: Woodward(USA), HEINZMANN(Germany)
• Electric Control System: ComAp(Czech), Deepsea(UK)
• Alternator: Siemens, LEROY-SOMER, Marathon  

5. Gas Requirements of Biomass Gas Genset

 Within 1m from pressure regulating valve of gas intake

• LHV ≥ 4.2MJ/Nm3
• Pressure of natural gas: 5-20kpa, rate of pressure change ≤ 1kpa/min
• H2S ≤ 200mg/Nm3
• Tar content ≤ 20mg/Nm3
• Nm3 ≤ 20mg/Nm3
• Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
• Moisture content ≤ 40g/Nm3

 6. More pictures of our equipment

10. Service 

(1) 24 hours- technology support service

(2) Professional engineer team

(3) Customized design based on real situation

(4) Detailed and professional layout drawing, installation drawing supplied and other drawing required by the customers.

(5) Engineer service on site

(6) Free training in Factory

(7) Equipment test before delivery

(8) One year guarantee period and lifetime service. 

(9) Spare parts supplied lifetime. 

Sincerely Welcome to Our factory

FAQ

   1) What are the continuous power and the standby power?

       It depends on the working hours of the genset per day. 

       It depends on the LHV of the fuel gas.

       It depends on the loading equipment.

       Standby power * 0.8 = continuous power

   2) How long is the warranty?

       One year

   3) Do you provide installation? commissioning? and training?

       Yes

   4) Your engineer can go abroad?

       Yes

   5) Can you supply the spare parts?

       Yes

   6) Can you provide the turnkey project?

       Yes

Detailed Contact Information

Mira Sun

+86-15194112090

Skype: sunxi5317

/en/