Copper Tinned Copper Pv1f Solar Cable 4mm2

Application of PV cable (solar cable)

Double insulated, electron-beam cross-linked cables for Photovoltaic power applications. Photovoltaic cable is mainly used in the line-line photovoltaics equipment systems under maximum 1.8kV DC voltage with safety class II. It should be compatible with standard joint and connection system.

Specifications

1. PV Solar Cable
2. Electron-beam cross-linked compounds
3. Easy to strip
4. Halogen free
5. Full test lab

Construction

• Conductor: Tinned fine copper strands, according to VDE 0295 / IEC 60228, class 5
• Insulation: Polyolefin Copolymer electron-beam cross-linked
• Outer sheath: Polyolefin Copolymer electron-beam cross-linked
• Sheath colour: Black or as per requirement

Technical specification

• Nominal voltage: U0 /U = 600 / 1000 V AC, 1000 / 1800 V DC
• Test voltage: 4000 V, 50 Hz, 5 min.
• Temperature rating:
• 40 °C up to + 125 °C
• 40 °F up to + 257 °F
• Ambient temperature: > 25 years (TüV)
• 40 °C up to + 90 °C
• 40 °F up to + 194 °F
• Max. short circuit temperature: 280 °C, + 536 °F
• Bending radius: ≥ 4 × outer diameter
• Standards: IEC60332, IEC61034, etc.

Advantages

• Electron-beam cross-linked compounds
• High mechanical resistance
• Resistant to heat, low temperature, oil, abrasion, UV, ozone and weathering.
• Hydrolysis resistant
• High temperature resistant, the materials do not melt or flow
• Good cold flexibility
• Very long life cycle
• Compatible to all popular connectors
• No corrosive or toxic gases are produced
• Little smoke is generated in the event of a fire
• Easy to strip

Parameter

Main manufacturing procedure

1. Copper wire drawing and annealing

2. Copper wire stranding

3. Outer sheath extruding and labeling

4. Spooling

About Us: