Product Details

Specifications

Safely and reliable,
high energy efficiency ratio,
energy-saving,
widely used.

Air source heat pump

1.Based on inverse cannot cycle principle, the unit can transfer energy in air into water through heat pump system, raise the water temperature to meet service conditions by consuming part of electric power.

2.It has high energy efficiency ratio, can produce 4kw heat by consuming every 1kw electric power. Comparing with traditional electric water heater which produces 0.95kw heat by consuming every 1kw electric power, its economic benefit is more than 4 times bigger than traditional heaters, or more than 2 times bigger than coal/oil (natural gas) furnace. Comparing with solar water heater, it is not restricted by installation conditions or weather conditions, can be used in all seasons.

3.Safely and reliable, electricity will not contact water directly during heating process, users will not suffer electric shock risk, nor explosion risk or poisoning risk of oil/gas furnace.

4.Environmental friendly, it will consume only part of electric power during operation, will not bring any pollution to the environment.

Application range:.

It is mainly applied to houses, hotels, restaurants, schools, hospitals, swimming pools, bathhouses, large high grade office buildings which have requirements on hot water.

Parameter

Model			DKFXRS-4Ⅰ/P	DKFXRS-6Ⅰ/P	DKFXRS-10Ⅰ/P	DKFXRS-16Ⅰ/P	DKFXRS-20Ⅰ/P
Heating Capacity		kW	4	6	10.5	15.8	20.6
Rated Input Power	Heating	kW	1.25	1.85	2.65	3.92	5.3
Rated Input Current	Heating	A	6.25	9.25	12	17.8	24.1
Rated Water Output		L/h	80	120	220	340	440
Top Out Water Temperature			60°C
Power Supply			220V/50Hz 1P				380V/50Hz/3P
Compressor Quantity		Sets	1	1	1	1	1
Fan Quantity		Sets	1	1	1	1	1
Refrigerant			R22(R410A)
Refrigerant Charge		kg	0.8	1.8	2	3.8	4.5
Ambient Temperature			-8°C~43°C
Control Manner			Central control and network control
Protection			High/low pressure protection, over-heat protection, over-current protection, water-break protection
Noise		dB(A)	50	52	57	59	60
Pump	Type		Stainless Multi-stage
	Pump Head	m	5	5	10	13	13
	Flow	m³/h	0.68	1.1	1.8	2.7	3.5
	Power	kW	0.055	0.055	0.25	0.37	0.37
	Quantity	Sets	1	1	1	1	1
Water Gap Spec	Nut	inches	3/4"	3/4"	1"	1"	1-1/4"
Net Dimension(LxWxH)		mm	880×360×630	880×360×630	1020×375×845	1000×555×1420	1000×555×1420
Net Weight		kg	58	65	80	180	220
Packing Dimension(LxWxH)		mm	930×410×760	930×410×760	1060×450×1000	1090×650×1590	1090×650×1590
Gross Weight		kg	65	72	92	200	240
Note:1) Nominal heating capacity is determined when ambient temperature is 20°C. 2) Hot-water feeding: temperature of compensating water is 15°C, outflow is 55°C.

Finished products