Mono block Heat Pump Water Heater(USA energy star and ETL approved)
Negotiable /Piece
Min.Order:1 Piece
Huizhou Hicool Climate Equipment Co., Ltd.
Mono block Heat Pump
technical data:
Item/Model | MH4WH-30G |
Tank Volume(L) | 100 |
Rated heating capacity(KW) | 4.7 |
Rated hot water ratio(L/H) | 100 |
Rated hot water temp.( °C) | 55 |
Max.Outlet water temp.( °C) | 60 |
Rated power supply | 220-240V~/50HZ; 220-240V~/60HZ |
Rated input power(KW) | 1.15 |
Rated input current(A) | 5.4 |
Max. input power(KW) | 1.6 |
Max. input current(A) | 7.56 |
Refrigerant | R417a |
Refrigerant (R22)filling quantity | 1100g |
Water inlet / outlet(mm) | DN15 |
Electric heater power(optional) | 3KW/6KW |
MG stick (optional) | Optional |
Electric shock protection class | I |
Waterproof Level | IPX4 |
Noise(dB(A)) | ≤52 |
Compressor | Toshiba rotary |
Evaporator | finned hydrophilic aluminum foil |
Condenser | one single-walled copper coil(1.0 mm thickness female thread ) |
throttle device | capillary |
Ambient temp. | -10°C~45°C |
Net Size (mm) | φ470 ×1413 |
Net weight(Kg) | 57.5 |
Packing size(mm) | 550×550×1500 |
Gross weight(Kg) | 60 |
Heating Test Conditions | Ambient Temp. :Dry/Wet bulb:20°C/15°C; Water input/output Temp.:15°C/55°C
|
Products Features:
1.(High-efficiency, energy-saving)
Adopts International Toshiba rotary compressor and R417a refrigerant, finned hydrophilic aluminum foil as evaporator, the AIRMAX brand heat pump can provide you large capacities heating on hot water with high COP.
2. (Safe, environmental-friendly)
Adopts technology of isolation between water and electricity, the heat is transferred and exchanged to the water by the heat exchanger which can avoid the electric shock if water touched with electricity. What is more, this can also avoid end gas and waste residue
From boiler heater, gas heater .Keep a green and clean space for you.
3. (Super anticorrosive)
Inside one single-walled titanium or copper coil as condenser, stainless steel 304 for both inner tanks and outer tanks which make sure solid cylinder.
4. (Easy Installation)
Main unit and water tank integrated to make the installation simple, just connect water pipes and the electricity power, then the integrated heat pump can work to heat hot water for you. .Very convenient for maintenance and inspections.
Products Photoes: