Product Details

Standalone Access Controller and Reader M2

1 Description& Features:

1.1 Description:

M2 is a waterproof standalone access control, reading EM&HID card, it uses advanced Microprocessor, with high-capacity flash memory for 10000 users. Users can be added and deleted via admin card, very simple to operate. The infrared remote control make the device not only have alarm, protection, two units interlocked, anti-passback function but also can make two units interlocked, add and delete the user on the remote control key directly.

Besides, it has low power consumption design, anti-theft alarm, door release button ect. , all these make it convenient, safe and reliable.

1.2 Features:

Feature	Description
Waterproof Design	Rainproof, moistureproof , durable
Ultralow power consumption	Longer working life, more stable performance
Large capacity	10000 card users
wiegand reader	Can used as wiegand 26 output reader
Connect external reader	Can connect EM/IC/HIDwiegand 26 output reader
two units interlocked	two units can be interlocked online
Anti-passback	Single door or two doors anti-passback

2 Installation, wiring, diagram

2.1 Installation:

2.1.1 Drill the holes according to the distance and the dimension on the back cover, or install the distributing box.

2.1.2 Thread the cable through the cable hole, connect wires needed, wrapped Unused wires with insulating tape in case of short circuit

2.1.3 Fix the back cover on the wall with special screw

2.1.4 Fix the front cover to the back cover with the screws

2.2 Wiring

No.	Marks	Color	Description
1	RESET	Pink	RESET
2	GND	Pink	RESET
3	D0	Green	Wiegand output D0
4	D1	White	Wiegand output D1
5	ALARM-	Gray	Alarm
6	OPEN	Yellow	Exit button
7	D_IN	Brown	Door contact switch
8	+12V	Red	+12V Input
9	GND	Black	GND
10	NO	Blue	Relay NO end
11	COM	Purple	Relay Com
12	NC	Orange	Relay NC end

Note: Please check all wires and install front cover carefully before power on.

3 Factory Reset and Set management card

Press initialized button,then power on,and then release after sound“didi…. When indication LED turns green,

it means you can set two admin cards now,read the first card as admin add card.the second card as admin delete card,

then LED turns red flash,after this, this device can work ,resetting to factory default.

Note: Reset factory default wont delete user cards, If you present the same card when second read,

the device will sound error reminding “dididi”, then you can continue present another card. If no operations within

10seconds, the device will enter working mode automatically , parameter reset to factory default.

...