With a commitment to provide high quality, reliable and affordable concrete pump supplies, we build trusting relationships with our customers by exceeding their expectations. We look forward to helping you with all your concrete pumping needs!
 

The parts department at Shengbang Concrete Pumps parts has satisfied customers that own ALL brands of pumps. Let us quote any concrete pump parts you are looking for.
 

Customers that own Schwing concrete pumpsnow have an alternative supplier for their wear parts. We now carry high-quality, after market parts for Schwing pumps. From concrete elbows to kidney plates, auger bearings and everything in between, Shengbang has it all at prices well below OEM. So, if you need parts for your Schwing, give us a call, we are happy to help!
 

Did you know we now carry a large inventory of parts for Putzmeister pumps. Now owners of Putzmeister Pumps have us as an alternative source for their standard concrete pump parts and for their Big-Mouth wear parts too.

1. Data of concrete rubber hose (Steel):

Characteristics: high tensile; wear, weather, ozone and aging resistance

Working pressure:85bar

Temperature range: -30− +80°C.

Safety factor: 1:3

Technical parameters: 

Hose lining: NR, SBR, BR blend        

Reinforcement layer: tire cord with helix wire

Cover rubber layer: SBR

Fabric hose

We manufacture both Steel wire reinforced rubber hose and  fabric reinforced rubber hose 

Dedicated to provide customers with one-stop concrete pump accessories procurement services.

(1) 24 hours online for before and after sale service

(2).Our products can be used for  most of concrete pump, SCHWING , PUTZMEISTER, KYOKUTO, SANY, ZOOMLION, CIFA etc.

(3). Free sample can be provide to test.

(4). Under normal use, if the flange drops, can exchange for free.

1. concrete pump clamp / coupling

DN125, also rubber seal can be supplied.

Snap Clamp

Bolt Clamp

Forged Steel & Casting Steel

ncrete pump reducer pipe

DN150-DN125,

length of 1000mm or 1200mm

ncrete pump pipe

1.Material:  ST52,45Mn2,Q235, No.20,37Mn5 etc.

2. Sizes: DN60-DN180 (mm unit)

3. Length: 1m,2m,3m, 6m or according to clients’ requirements.

4. Packing:  With waterproof plastic film and ends

ncrete pump pipe is made of special quality steel which is quenched and carried out carburizing chemicaltreatment on the inner wall.

6..The hardness of the flanged bushings can reach 58-60 degrees and the serving life of

pipe line can increase 3 -5 times, which enables users to save time and cost, enhancing the production efficiency.

4.concrete pump cleaning ball

DN125 /DN150  Soft / medium / hard kind

     (1). Hose outside packing with  Plastic bags and caps to protect surface and flange.

     (2). Packing in wooden case, 50 pcs per I CBM wooden case, Fit for LCL goods, qty less than   250 pcs.

     (3). More than 1000 pcs can put in bulk .

Q1.How many layers steel wires of this hose and how many steel wire of each layer is composed of?

A.Using four layers steel wire winding technology, each layer is composed of 100 steel wires,
which structure can guarantee the maximum combination of steel and rubber.

Q2.How many cubic feet concrete can be casted by one hose?

A. Many factors affect the casting cubic feet, such as the different aggregate between different counties,
the different concrete pump and whether the hoses can be properly operating or not etc.
Gerenally speaking, under the normal condition of concrete pump, the delivery capacity is not less than
20 thousand cubic feet or even up to 25 thousand.

Q3. Why does the wires always come out of the hose end? How to avoid ?

A: It is very important to bond the steel wire and rubber well. The degumming is often arised if the
steel wire cannot bond closely with the rubber. In order to avoid this problem and lower the
degumming rate to a minimum we add a bonding layer above wear-resistant layer.

Q4. It's very dangerous when the hose head fall off, how to avoid this problem?

A: We make a 100% fall off inspection before the hoses leave the factory in order to make sure every hose
can reach the operational requirement

Q5. Could you supply free sample ?

Yes, free sample can be provided to make test . But please buy an air ticket for it.

Q6.Are you manufacturer ?

     Yes, we are real manufacturer which is located in Liaocheng City ,Shandong Province with 10+2 years both domestic and foreign market experience .

Contact information:

Vivian

Sales Department

Skype:wang.vivi98

Mob:0086-18953905628

Shandong Shengbang Pump Parts Co.,Ltd

We are looking for distributors all over the world .  Welcome to join Shengbang Family !