Product Details

Product Description

14" 16" inch Carbon Steel Cutting wheel / Cut off wheel / Disc 350mm 355mm 400mm 405mm

This product made of corundum or silicon carbide abrasive series, added fiber fabric as strengthen material, with the features of anti-tensile, anti-impact and anti-bend, high cutting efficiencty, safe, maximum speed exceed 80m/s. Applicable to all kinds of steel, stainless steel, iron. Widely used in various fieids of automobiles, ships, machinery manufacturing, engineering construction cleaning welds, solder joints, burr, grinding metal surface.

Products Dimension

Other sizes cutting grinding wheels:

A: T41 depressed center cut off wheel

Wheel Size	R.P.M	Wheels / Case
105 X 1 X 16mm	15200	800 Pcs
107 X 1 X 16mm	15200	800 Pcs
350 X 2.8 X 25.4mm	4370	25 Pcs
350 X 2.8 X 32mm	4370	25 Pcs

B: T42 type depressed center reinforced cutting wheel

Wheel size	Speed R.P.M	Wheels / Carton
115 X 2.0 X 22.2 mm	13300	400
125 X 2.5 X 22.2 mm	12200	400
125 X 3 X 22.2 mm	12200	400
180 X 2.5 X 22.2 mm	8500	100
230 X 3 X 22.2 mm	6600	50

C:T27 type depressed center reinforced grinding wheel

wheel size	speed R.P.M	wheels / case
100 X 6 X 16 mm	15200	200
115 X 6 X 22.2 mm	13300	200
125 X 6 X 22.2 mm	12200	100
150 X 6 X 22.2 mm	10200	100
180 X 6 X 22.2 mm	8500	50
230 X 6 X 22.2 mm	6650	40

D: T27 / 29 Depressed center flap disc

flap disc size	speed R.P.M	flap disc / case
100 X 6 X 16 mm	15200	500
125 X 6 X 22.2 mm	12200	300
180 X 6 X 22.2 mm	8500	150

Packaging & Shipping

Plastic shrinked, then inner craft box, outer craft carton or color carton.

Choose and Test

Acoording to grinding and cutting principle, different types of material and condition need to select a different raw material, different binding material, different hardness adn organized number to obtain the best cutting and grinding effieiency. Our company could creat a variety of high- quality abrasive products for your choise.

Large consumption cutting please use the high hardness level of abrasive discs. Conversely, the lower hardnesss.

Workpiece Materials	Selection of Discs Abrasive Raw Materials
Carbon steel	A24 - 36 Q
Gray cst iron, iron ball	C24 - 36 P
Stainless steel	A. WA24 - 36 P
Alloy stel	WA24 - 36 P
Copper, Aluminum	C24 - 36 N

Safety Usage Guide

1. Checking carefully before installation to ensure no damage, voiceless and deformation. No tapping, bending abrasive discs.

2. Abrasive discs installation, use and the equipment should according to the provisions of EN12413.

3. Pay attention to check the flatness of the flange diameter and adjust the shims should meet the safety requirements when installation.

4. Unreinforced abrasive discs flange diameter should be 1/3 bigger than abrasive discs diameter. Reinforced abrasive discs flange diameter should be 1/4 bigger than abrasive discs diameter.

5. Choose matching equipment, shall not be forced to install and change the installation hole. Do not exceed the maximum operating speed which allowed by the abrasive discs.

6. Let the newly installed abrasive discs blank run more tahn 60 seconds before working.

7. During operation, Idlers forbiden in the workspace, the workers should not stand in front of the abrasive discs. It is strictly prohibitied to use both side of reinforced grinding disc proceeding grinding.

Storage

Abrasive discs should store in place of moisture-proof, sun-proof, horizontal stacked. The height of stacked should less than 1 meter, storage time better is not exceed 1 year.

FAQ