Specifications

galvanized barbed wire
1. ISO9001:2008
2. Barbed wire dia:BWG8-17
3. Barbed length:1.5cm-3cm
4. 20 years factory...

Galvanized barbed wire

 

Barbed wire, also known as barb wire, and somtetimes bob-wire or bobbed wire, is a type of fencing wire constructed with sharp edges or points arranged ar intervals along the strand. It is used to construct inexpensive fences and is used atop walls surrounding secured property. It is also a major feature of the fortifications in trench warfare(as a wire obstacle).

 

 Specifications:

Type	Wire Gauge  (SWG)		Barb Distance (cm)	Barb Length (cm)
Electric galvanized barbed wire ; Hot-dip galvanized barbed wire	10# x 12#		7.5 - 15	1.5 - 3
	12# x 12#
	12# x 143
	14# x 14#
	14# x 16#
	16# x 16#
	16# x 18#
PVCcoated barbed wire; PE barbed wire	Before coating	After coating	7.5 - 15	1.5 - 3
	1.0mm-3.5mm	1.4mm-4.0mm
	BWG11# - 20#	BWG8# - 17#
	SWG11# - 20#	SWG8# - 17#
Remark	RAL 6005 Other colors and length are available at customers request

There are several ways to anchor the wire to a corner post:

1. Hand-knotting: The wire is wrapped around the corner post and knotted by hand. This is the most common method of attaching wire to a corner post. A timber hitch works well as it stays better with wire then wire rope.

2. Crimp sleeves: The wire is wrapped around the corner post and bound to the incoming wire using metal sleeves which are crimped using lock cutters. This method should be avoided because while sleeves can work well on repairs in the middle of the fence where there is not enough wire for hand knotting, they tend to slip when under tension.

3. Wire vise: The wire is passed through a hole drilled into the corner post and is anchored on the far side.

4. Wire wrap: The wire is wrapped around the corner post and wrapped onto a special. gritted helical wire which also wraps around the incoming wire, with friction holding it in place.