LiFePO4 48v 15ah battery pack for e-bike
Negotiable /Piece
Min.Order:1 Piece
LiFePO4 48v 15ah battery pack for e-bike
| ||
No. | Specification | Parameter |
1 | Model: | 40155A-OSN-4815 |
2 | Material: | Lifepo4 |
3 | Nominal Volt: | 51.2V (3.2V any single cell) |
4 | Nominal Capacity: | 15AH |
5 | Weight: | 7.8Kg |
6 | Dimension:(L*W*H) | 192*182*182mm |
7 | Configuration | 16S1P |
8 | Fully-charged pack voltage: | 58.4V (3.65V any single cell) |
9 | Recommended cut-off voltage: | 40V (2.5V any single cell) |
10 | Minimum voltage: | 32V (2V any single cell) |
11 | Standard charge Rate: | 0.2-1C |
12 | Continuous Discharge Current: | 20A (motor:950W or below) |
13 | Working Charge Temp : | 0~50°C |
14 | Working Discharge Temp: | –20°C~50°C |
15 | Storage Temperature: | –20°C~50°C |
16 | Application: | e-bike batteries, pedal battery, electrical bicycle etc. |
17 | Recommended Charger: | 2A LiFePO4 Professional Charger |
18 | Circle life: | 2000 cycles to 80% with 100% DOD under normal temperature |
Features:
LiFePO4 (Lithium Iron Phosphate) battery is among the best e-bike battery choices available, with its intrinsic advantages over other chemicals: safety, high discharge current, low capacity loss, super-long cycle life.
1. - LiFePO4 technology, large capacity, non-toxic, never explode.
2. - Super long cycle life and shelf life: 2000+ 100% DOD to 80% capacity or 5 to 7 years life, 3 times as the normal SLA battery, cost-efficient.
3. - Built-in BMS (battery management system) with over-discharge/ over-charge protection and balancing function for each cell in the battery pack.
4. - High quality professional LiFePO4 charger.
Warnings:
1.Risk of fire, explosion, or burning.
2.Do not short circuit the (+) and (-) terminals with any metals.
3.Do not immerse, wet, or throw battery in water.
4.Do not keep battery in heated temperature above 60 or throw battery into fire.
5.Do not disassemble, crush, or modify the battery.
6.Stop using the battery if abnormal heat, odor, deformation or abnormal condition is detected.