Product Details

MPPT 40/60A 12/24/36/48V solar charge controller

Product Description

Introduction:

Soltrack MPPT series controller is a leading product in the industry, which has high cost performance.

The advance MPPT tracking function can increase the PV system energy output by 30%, which can lower the energy cost significantly. Max input voltage is 150V, makes it flexible to use kinds of PV modules. Input/output high frequency isolated design makes it possible to use thin-film modules.

Soltrack MPPT series controller can work at rated charging current under 40°C ambient temperature based on its advanced cooling design. LED indicating lights can work under -25°C ambient temperature. The single version display mode REMOTE01 can display the parameters through LCD also.

Product features:

Intelligent and high efficiency :

Ø MPPTtracking maximizesthe power transformation
Ø Optional LCDcanbe used for displaying and adjusting parameters
Ø Temperature controlledfan
Ø 12V/24V/36V/48V automatic recognition
Ø Parallel connection allowed, simultaneous display
Ø Battery discharge management (dryport)

Safety and reliability :

Ø Input/output high frequency isolated design maximizes the operation safety.
Ø Intelligent multiple protection : Over temperature / reverse protection / low voltage protection
Ø Temperature compensation enhances long-term Reliability

Remote control :

Ø Remote switcher feature.
Ø Display controller parameters remotely.

Technical parameters:

Type	Soltrack 40	Soltrack 60
Electrical parameter
Rated charging current	40A adjustable (40°C)	60A adjustable (40°C)
Recommended solar system	12Vdc 480W/ 24Vdc 960W/ 36V 1440W/ 48Vdc 1920W	12Vdc 720W/ 24Vdc 1440W/ 36V 2160W/ 48Vdc 2880W
Max. input voltage (Voc)	150V
System voltage	12V/24V/36V/48V
No load current draw	<2W
Temperature compensation	-4mV/°C/cell
Charging efficiency	>98%
Voltage Step-Down Capability	Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Network Cabling	Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging	Optional (REMOTE01, ADM-01, ADM-BLUE, ADMGPRS)
Charging process	bulk, absorption, float
Hydro Turbine Applications	Consult factory for approved Turbines
Float charge	13.7V/27.4V/41.1V/54.8V, voltage adjustable
Absorption charge	14.0V/28.0V/42.0V/56.0V, voltage adjustable
Bulk charge	14.4V/28.8V/43.2V/57.6V, voltage adjustable
Interface	RS485, MODBUS protocol
Dry port	Remote display, low voltage disconnect, generator start
Operation condition
Temperature	Operation temperature is -20°C - 50°C (power derated when T>40°C), storage and transportation temperature is -30°C - 70°C.
Altitude	≤3000m (if altitude ≥1000m, power derated 1% as altitude raise 100m.)
General data
Dimension	328mm x 205mm x 87.5mm
Weight	3.7 KG / 4.2 KG
Safety
Safety Standards	EN60950-1, IEC 62109
EMC Standards	EN55022, EN55024, Class A
Protection
Over temperature protection	70°C (recovery after cooling)
Reverse protection	Input/output of controller
Protection class	IP21

Configuration:

Product application: