ATNJ 2g mobile booster, gsm 900mhz signal repeater, smart booster repeater 2g gsm amplifier
USD $20 - $45 /Set
Min.Order:1 Set
Shenzhen ATNJ Communication Technology Co., Ltd.
Repeater 3g gsm LCD Display 850mhz gsm cell booster GSM mobile signal amplifier
3g gsm repeater 850mhz signal repeater 3G WCDMA mobile signal booster /GSM 3G signal repeater
mobile signal booster repeater 3g 1900mhz cell signal repeater wcdma signal repeater
Mobile signal booster repeater amplifier 3G 4G LCD Smart display Signal Booster amplifier
4g mobile signal repeater AWS mhz signal booster/amplifier with LCD smart display
Suitable to worldwide ATNJ factory GSM 900MHZ 2G/3Gsignal repeater 4 colors for your selection:
GSM 900MHZ 2G/3G Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
CDMA/GSM 800MHZ | PCS1900MHZ | GSM900 MHZ | DCS1800 MHZ | 3G2100MHZ | |
UL824-849MHz DL869-894MHz
| UL1850-1910MHz DL1930-1990MHz | UL890-915MHZ DL935-960MHZ | UL1710-1785MHZ DL1805-1880MHZ | UL1920-1980MHZ DL2110-2170MHZ | |
Gain | >65dB | ||||
Automatic Gain Control( AGC) | >30dBm | ||||
Noise Figure | >4dB | ||||
Gain Flatness | >5dB (p-p), | ||||
Automatic Gain Control (1dB step) | 30dB in step of 1dB (Auto) | ||||
Maximum Output Power | UL10-20dBm DL15-27dBm | ||||
Input power range | -55 dBm~-15 dBm | ||||
Intermodulation Products | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Spurious Emission | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Group Delay | UL 1μs | ||||
AC POWER | AC 95-250V | ||||
Adapter output power | DC5.0V | ||||
Temperature range | -25℃~+55℃ | ||||
Relative humidity | ≤80% | ||||
RF interface | SMA-F | ||||
Power interface | KLD-35-13 | ||||
Weight | ≤0.3kg | ||||
Size | 160×100×27mm |
1,Intelligent to guide the installation with LCD
2,Real time display the signal strength.
3,Automatic dormancy when no user make the calling
4,Automatic remind the installation mistake and provide the corresponding solution with LCD
5,Automatic adjust the system gain to avoid the repeater self-excitation
6,initiative reminding when device damaged