New Upgrade 800mhz 4g signal repeater amplifier LTE Mobile Signal Booster For Europe 4G
USD $30 - $45 /Set
Min.Order:1 Set
Shenzhen ATNJ Communication Technology Co., Ltd.
New arrival!! LCD smart display 800mhz 4g signal repeater amplifier 4g signal booster
LCD Real Smart display dual band 1800/2100mhz signal booster 2g+3g signal amplifier repeater
ATNJ 2016 The New Generation 1800/2100mhz LCD smart display Signal Booster repeater 2G 3G
ATNJ 2016 new Generation 1800/2100mhz Signal Booster repeater With LCD
ATNJ1800/2100mhz dual band signal booster 2G+3G /4G LCD Dispaly signal repeater
Global application ATNJ factory LTE 800MHZ 4G signal repeater 4 colors for your selection:
LTE 800MHZ Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
1,GSM900 BOOSTER ×1
2,POWER ADAPTER×1
3,STICK ANTENNA×1
4,PENHOLDER ANTENNA×1
5,16M CABLE×1
6,MOUNTING ACCESSORIES
CDMA/GSM 800MHZ | PCS1900MHZ | GSM900 MHZ | DCS1800 MHZ | 3G2100MHZ | |
UL791-821MHz DL832-862MHz
| UL1850-1910MHz DL1930-1990MHz | UL890-915MHZ DL935-960MHZ | UL1710-1785MHZ DL1805-1880MHZ | UL1920-1980MHZ DL2110-2170MHZ | |
Gain | 70dB | ||||
Automatic Gain Control( AGC) | 30dBm | ||||
Noise Figure | 4dB | ||||
Gain Flatness | 5dB (p-p), | ||||
Automatic Gain Control (1dB step) | 30dB in step of 1dB (Auto) | ||||
Maximum Output Power | UL:10-20dBm DL:15-27dBm | ||||
Input power range | -55 dBm~-15 dBm | ||||
Intermodulation Products | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Spurious Emission | 9KHz~1GHz | -36dBm @ 3KHz | |||
1GHz~12.75GHz | -30dBm @ 3KHz | ||||
Group Delay | UL:1μs | ||||
AC POWER | AC 95-250V | ||||
Adapter output power | DC5.0V | ||||
Temperature range | -25℃~+55℃ | ||||
Relative humidity | <80% | ||||
RF interface | SMA-F | ||||
Power interface | KLD-35-13 | ||||
Weight | ≤0.3kg | ||||
Size | 160×100×17mm |
1,Intelligent to guide the installation with LCD
2,Real time display the signal strength.
3,Automatic dormancy when no user make the calling
4,initiative reminding when device damaged
5,Automatic detect the installation mistake and provide the corresponding solution with LCD