Yaesu FT-1802M VHF 50W invehicle radio,mobile radio,Car Radio
USD $10 - $100 /Set
Min.Order:10 Sets
Quanzhou XD Wireless Electronics Co., Ltd.
Black VGC VR-6600PRO, Car Radio ,VHF+UHF 1000CH 50W, Mobile Ham Radios for Car
New Yaesu FT-1907R, 50W UHF FM Mobile Radio Transceiver, 400~470(MHZ)
Yaesu FT-7800 dual band mobile High Quality radio transceivers,Mobile Radio,Car Radio
Yaesu FT-2900E ,100 Watt Version,VHF MOBILE, 136-174 MHZ RX & TX, DTMF, FT-2900R
QYT KT8900 ,Mini Mobile Radio Transceiver, Hande microphone Car Truck Taxi Ham
Yaesu FT-1802M VHF 50W invehicle radio,mobile radio,Car Radio
50 Watts of Power Output
The FT-1802M provides a hefty 50 Watts of power otput, with "low power" settings of 25, 10, and 5 Watts, for situations where full power is not required.
Extended Receiver Coverage
The FT-1802M provides receiver coverage of 136-174 MHz, so you can listen in on a wide variety of commercial, military, public safety, and marine communications.
Illuminated Microphone with Keyboard Frequency Entry
The supplied MH-48a6j DTMF Microphone is illuminated for eas of nighttime use, and you may enter operating frequencies directly from the keypad. What's more, memory channels may also be recalled directly via the keypad.
221 Memory channels with Alpha-numeric Labeling
The FT-1802M's extensive memory system includes 200 regular memories, ten pairs of band-limit memories, and a one-touch "Home" channel. Memory channels store repeater offset information, as well as CTCSS or DCS data, and can have a six-character label appended, for quick channel recognition. And the memories may be allocated into as many as eight memory banks, for more efficient scanning.
Dedicated 10-channel NOAA Weather Broadcast Channel Bank (U.S. version)
Included in the FT-1802M is a dedicated, quick-access memory bank that contains the ten standard NOAA Weather Information Channels, so you can keep track of weather conditions expected for your area.
Programmable "Soft" Keys
Four user-programmable "soft" keys are provided on the MH-48a6j microphone, allowing you to bring often-used Menu items, or front panel key functions, to your fingertips.
Built-in CTCSS and DCS Encoder/Decoder Circuits
The FT-1802M includes both CTCSS and DCS Encoder/Decoder circuitry, with Reverse CTCSS Decoding also available, to mute your receiver when a particular tone is received (instead of opening your squelch). And you can encode CTCSS and decode DCS, or vice versa, too, if your application requires it.
Adjustable Mic Gain and Wide/Narrow Deviation and RX Bandwidth
The microphone gain for the FT-1802M's transmitter is adjustable, so you can optimize it for your voice level as well as background noise in your operating location. And for operation in crowded channel environments, the TX deviation and RX bandwidth may both be reduced via the Menu.
Automatic Repeater Shift (ARS), Automatic Power-Off (APO), and BCLO (Busy Channel Lock-Out)
ARS: Automatically selects the typical repeater shift used in your country, based on the current operating frequency.
APO: Automatically turns power off after a user-defined time period, to prevent you from running down your car battery if you forget to turn your rig off.
BCLO: Prevents you from transmitting on an occupied frequency (especially valuable during Tone Squelch or DCS operation).
CW Trainer
You can practice your Morse Code recognition, using this novel trainer that sends you five-character code groups, with variable speed and instant feedback as to the correct characters sent to you.
Security Password to Prevent Unauthorized Use
A defeatable (by the owner) Security Password system is provided for the FT-1802M, so you can limit operational access to yourself and any other users (if any) informed of the password for the transceiver.
Easy Access to YAESU's Renowned WiRES-II™ Internet Linking Nodes
A front panel key provides instant access to WiRES-II nodes. More information about WiRES, Yaesu's exciting and fun way to communicate via Amateur Radio AND the Internet, may be found at the WiRES-II.
GENERAL | |
Frequency Range Receive: | 136-174 MHz. |
Frequency Range Transmit: | 144-148 MHz |
Channel Steps: | 5/10/12.5/15/20/25/50/100 kHz |
Frequency Stability: | Better than 10 ppm (-20°C to +60°C) |
Mode of Emission: | F2D/F3E |
Antenna Impedance: | 50 Ohm, Unbalanced |
Operating temp range: | -4° to +140°F (-20°C to +60°C) |
Supply Voltage: | DC 13.8V 10%, Negative Ground |
Current Consumption (typical): | 0 |
RX: | Less than 0.7A (max. audio) |
0 | Less than 0.3A (Squelched) |
TX: | 10A (50W) / 7A (25W) / 5A (10W) / 4A (5W) |
Operating Temperature Range: | -20°C to +60°C (-4°F to +140°F) |
Case Size: | 5.6 x 1.6 x 5.8 inches (w/o knobs) |
0 | 140(W) x 40(H) x 146(D) mm |
Weight: | 4.0 lb. (1.8kg) |
0 | |
TRANSMITTER | |
RF Power Output: | 50/25/10/5 Watts |
Modulation Type: | Variable Reactance |
Maximum Deviation: | 5 kHz / 2.5 kHz |
Spurious Radiation: | Better than -60dB |
Microphone Impedance: | 2 K Ohm |
0 | |
RECEIVER | |
Circuit Type: | Double-Conversion Superheterodyne |
Intermediate Frequencies: | 21.7 MHz and 450 kHz |
Sensitivity (12dB SINAD): | Better than 0.2uV |
Selectivity: (-6/-60 dB): | 12 kHz/28 kHz |
IF Rejection: | Better than 70 dB |
Image Rejection: | Better than 70 dB |
Maximum AF Output: | 3 W into 4 Ohm @ 10% THD |
0 | |
Specifications are subject to change without notice, and are guaranteed within amateur bands only. | |
Frequency ranges and repeater shift vary according to transceiver version. |
Shipping terms
1-2 days for sample order, 3-5 days for bulk order
Customer Service
1. OEM&ODM service offered
2. Sample’s fee can be refunded after order reaches 1000 sets
3. Delivery can be express: DHL, UPS,FedEX, EMS,TNT
Warranty
Before delivey, we will check the item’s quality strictly one by one. Life –warranty for radio host &accessores, please contact us immediately when you get defective, thanks.
Payment terms
Payment: Paypal, T/T, Western Union (please do not believe anybody by E-mail say our bank change, thank you)
Contact us
Mario Lin
Tel:0086-15880011801
WhatAapp: 8615880011801
1 Q : Can I get an sample before I place an order
A :Yes , we can send you an sample before you place an order .
2 Q ; Can the sample free ?
A : No , the sample won't be free .We can send you the sample at factory price
3 Q :What is your warranty ?
A : For the walkie talkie body , we can supply one year warranty , and for the accessories we can supply half year warranty .
4 Q :What is your MOQ
A : Our MOQ is 1 pcs .
5 Q : Can you do OEM order ?
A :Yes , we can enlarge or dwindle the frequency .And we can paste your logo on the walkie talkie ,battery ,and charger .OEM is welcomed