Specifications

Perforated metal mesh are made by punching machines. Perforated Metal is one of the most versatile products on the market today.

               Perforated Metal Mesh

Perforated metal mesh are made by punching machines. Perforated Metal is one of the most versatile products on the market today.

Widely used in the architectural, engineering, building, agricultural, nuclear power, food processing, and petrochemical industries.

 It can be made in a range of round, square, slotted or decorative patterns. The round hole perforation is the most popular type of perforated pattern used and is manufactured in coils or sheets.

We have a full and comprehensive finishing service

Materials:Low carbon steel plate, stainless steel plate, aluminum plate, Al-Mg alloy plate, etc.

 

Norminal Filter rating (micron) Protective Layer Control Layer Dispersion Layer Reinforcing Layer Reinforcing Layer Thickness mm A.P. at 1000Pa (L/min/c) Mean B.P.P (mmH2O) Weight Kg/ Porosity (%) 1 200 400×3000 200 12×64 64×12 1.7 1.81 360∼600 Five-layer Sintered wire mesh (8.4)  Six-layer Sintered wire mesh (14.4)  About 40% 2 100 325×2300 100 12×64 64×12 1.7 2.35 300∼590 5 100 200×1400 100 12×64 64×12 1.7 2.42 260∼550 10 100 165×1400 100 12×64 64×12 1.7 3.00 220∼500 15 100 165×1200 100 12×64 64×12 1.7 3.41 200∼480 20 100 165×800 100 12×64 64×12 1.7 4.50 170∼450 25 100 165×600 100 12×64 64×12 1.7 6.12 150∼410 30 100 400 100 12×64 64×12 1.7 6.86 120∼390 40 100 325 100 12×64 64×12 1.7 7.10 100∼350 50 100 250 100 12×64 64×12 1.7 8.41 90∼300 75 100 200 100 12×64 64×12 1.7 8.70 80∼250 100 100 150 100 12×64 64×12 1.7 9.10 70∼190 150 50+100+50+30+30+100+50 2.0 25.00 50∼150 200 40+80+40+20+40+80+40 2.0 26.00

Note:Plus 12 mesh on basis of 5-layer sintered wire mesh become 6-layer sintered wire mesh ,thickness 3.5 ,and fine resistance to pressure.