Specifications

automatic diamond mesh machine
size:2100x1900x1500
hole size:25x25-175x175
the finished good acrroing to the model

                                                            Automatic Diamond Mesh Machine 

 

                                       

Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place. 

The chain link is automatically wound to form rolls when the desired length is manufactured.

The machine is controlled by PLC automatic controller, so only one person is needed to operate it. 

One side or both sides of the end of net hole is twisted or with burr in edge.

Use compacting machine to make it into rolls.

 

Capacity	80-120(m2/hour)
Wire Diameter	1.8-4.2mmFeeding Wire Numbers: two (Note: Steel Wire Standard: GB3081-82 YB544-65; Material Standard: B1F-B3F
Size of Mesh	25x25-100X100(mm)
Netting Width	500-4000(mm)
Power and Rated voltage	9.0KW  380V,50HZ
Dimensions	3700x1430x1800  2100x1700x1250

 

♣Electric System:

               The machine is controlled by PLC automatic controller

               Germany Siemens PLC origin

               The inverter is selected from high quality products

               Of Japan”YASKAWA”

               Electrical

               Low-voltage electrical from Germany Schneider

               Electric&Machinery from Taiwan Teco Electric

               Clutch from Taiwan YA CO,.LTD.

♣ Suitable wire to the machine:

High-quality low-carbon steel wire ,Galvanized steel wire ,Stainless steel wire ,Aluminum alloy wire,Aluminum-clad steel wire.

♣ Function:

Chain Link Fencing is extensively used as fences for playground and gardens,super highway,railway,airport,port,residence,etc.