Specifications

1. Signal meter satellite finder meter satlink ws6906
2. 3.5LCD screen
3. Strength and quality reading
4. both S/N and C/N

1. Color TFT LCD display with 3.5 "/ 8.9 inch
2. Built-in speaker
3. Display the signal strength in percent and as a bar
4. Display of signal quality as a percentage and as a bar
5. Acoustic signal when a transponder is locked
6. Automatic Channel Search TV + Radio
7. Reception and playback of DVB-S Free to Air TV programs
8. Reception and playback of DVB-S Free to Air Radio Programs
9. Using an adapter cable can be connected to the device to the TV set and satellite receiver are used as normal
10. Firmware update via RS232 interface
11. 7 Menu Languages: English, French, Russian, Arabic, Farsi, Portuguese, Turkish
12. Built-in 8.4V / 3000mA / h Li-Ion battery for up to 6 hours operating time
13. Charging time 4 hour

    System capabilities	Fully DVB compliant	Yes
    LNB/Tuner input	Connector	F type,male
    	Frequency range	950MHz-2150MHz
    	Signal lever	-65dBm~-25dBm
    	LNB supply	13/18V,max400mA
    	LNB switch control	22KHz
    	DiSEqC	Ver 1.0
    Demodulator	Front end	QPSK
    	Symbol rate	2Mbps~45Mbps
    	SCPC and MCPC Capable	Yes
    	Spectral inversion	Auto conversion
    System resource	Processor	32bit processor (200MHz)
    	SDRAM	16Mbyte
    	FLASH	2Mbyte
    	EEPROM	8Kbyte
    Video decoder	MPEG 2	Main Proflie@Main Level
    	Data Rate	up to 15M bits/s
    	Resolution	720*576,720*480
    	Video format	PAL/NTSC/SECAM
    MPEG Audio	MPEG 1 layer 1&2
    	Type	Mono
    	Sampling rates	32,44.1 and 48KHz
    Serial data interface	Connector	USB type
    Power supply	Li-oN Battery	1950 mA
    	Supply voltage	12.6Volt
    	charger	90-240V
    Panel connectors	Digital tuner input	F type, male