Width of 5cm aluminum self adhesive bitumen flashing tape
Introduction
Self adhesive bitumen flashing tape can be used for general flashing applications, sealing glazing bars, sealing leaks in gutters, valleys, down pipes, capping, caravan seams and various corrugated and flat roofs. Also suitable for sealing roof lights and repairs to cracked glass.
a. instant waterproof seal, even in famp conditions.
b.quick and easy to apply, no specialist tools required.
c.4 layers or protection: lacquer foil, membrane and bitumen adhesive
d.superior temperature resistance from -20℃ to +100℃ -easily moulds to contours.
e.long lasting protection, at least 15 years
f.available in a wide range of sizes.
Storage Life: 12 months stored between 5 ℃ and 25℃ in original containers
1. Product description:
The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the base covered with a release sheet,keep the self-adhesive flexible waterproof. The product has a good self-adhesive and bending properties.
2. Application:
Construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.
Cut flashing to the required length, remove the release film and press down the adhesive bitumen to the previously prepared surface.
Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.
Final rolling down of the edges with a wallpaper roller will ensure a good edge seal.
All overlaps should be a minimum of 25mm and well rolled down.
Note: In cold weather adhesion will be imporved by storing the roll in a warm room for 12 hours or more before use, or by gently warming the strip during application.Do not apply below 5 ℃.
3. Thickness:
1mm,1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.
4. Width:
5cm-100cm
5. Length:
3m, 5m, 10m, 15m, 20m
6.USE
Flashing, repairs, guttering, down pipes, glazing bars, capping, sealing
We produce SBS/APP modified bitumen waterproofing membranes, Self adhesive bitumen waterproofing membranes, Self adhesive bitumen flashing tape, Self adhesive butyl waterproofing tape, PVC/TPO/HDPE/EVA waterproofing membranes, Polymer compound waterproofing membrane, Liquid bitumen coating, etc, our company also export Non woven polyester mat for bitumen membranes, Glassfiber mesh compound mat for bitumen membranes, Glassfiber mesh, Modified bitumen membrane production lines, etc
Our products are sold in over 20 countries all over the world. Approximately 70% of the total produced materials are supplied to the China market while the remaining 30% are exported to European countries, Middle East, South East Asia, South American and U.S.A.
Honest is our business policy, quality and service first. The key of the successful activity in the high quality of research and controls before, during and after production.