Product Details

hot sale no-grider arch sheet cold roll forming machine

Product Description

Main Parameters of Large-Span No-Girder Arch Structure Roof Panel Equipment Roll Forming Machine

Model number	610 large-span no-girder arch structure roll forming machine
Rolled material	0.6-1.5mm thickness, aluminium sheet, galvanized sheet, colored steel sheet and various steel plates
Effective width	610mm
Feeding width	914mm
Forming steps	15
Roller	45# forged steel, hard chrome plating within 0.05mm
Diameter of shaft	70mm
Main frame	300H steel
Main motor power	7.5 kw
Pump power	4 kw
Medium plate thickness	14mm
Sprocket chain	1 inch
Drive type	by chain
Cutting Blade	Cr12, heat treatment 60-62°C
Frequency Converter	It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm).

Remark: Above parameters are standard, we can design and make some change exactly according to your requirements.

The structure of machine

1 set of manual decoiler	Un-powered; Single head; Max. Capacity: 5000kg; Coil inner-diameter: 508mm
1 set of main roll forming machines	Steps: 13 Roller Material: 45# steel Voltage: 380V/50Hz. Line speed: 12m/min; Rolling chromium thickness: 0.05 mm
1 set of computer control cabinet	It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted. 5.7 inch touch screen, easy to operate Computed mode has two modes: Automatic and manual one.
1 set of hydraulic System	It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job. Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves. Power of the oil pump: 3kw Hydraulic oil: 40#
1 set of cutting mechanism	It adopts hydraulic drive and automatic location to decide the dimention and cut the target products. Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine. Stop to cut, Post cut cutting length tolerance: ± 2mm Cutting tool material: GCr12 with quenched treatment 60-62° C
1 set of counter	One counter gauges length, pulses, and decides length
1 set of output table	It used to load the forming plate

Material-fed supporting frame

Automatic shearing mechanism

Hydraulic system

Computer control cabinet with imported PLC

Technical process:

Manual decoiler---feed with guide---roll forming---press step---cut with fixed length---output with table

Equipment Parts

Decoiler, roll forming machine, hydraulic cutting device, electric system(PLC control system), hydraulic system, stacker.

machine picture show and some deatils

Component line

FAQ about roll forming machine :

Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.

Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.

Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.

our other products

Need my help now?I am here for you,my friend