Product Details

Products:

install activex control ip camera

Main feature

1. GSM/GPRS tri-band network wireless image, message and voice transfer 2. Monitor the site and receive on-site images via GSM/GPRS phone, CDMA phone or email at any time and place 3. The system may monitor a on-site images and voices through remote control ( short message or calling commands) 4. Enough backup power supply ensures normal transfer at any time 5. The system is equipped with external power and shall report by message if power off 6. The camera may be well used at daytime and night, when the daylight is not enoug, a built-in IR lap shall turn on automatically 7. The system has a function of memory that makes it unnecessary to set up again after the system is restarted. 8. 16 channel wireless defense area ( each area can be started or closed alone) are equipped with IR smoke, gas and PIR/wireless sensors. Any sensor or moveable image detection may trigger the alarm host to sound alarm and immediately transfer on-site images, messages and voices to a user and alarm center. 9. The system may set up the parameters of a alarm host and arm/disarm defenses through short message or phone. 10. The remote controller is equipped with an emergency button. 11. The quantity of remote controllers and detectors may be added or reduced at will. 12. The system may be linked to the alarm center via GSM platform.

Technical Specification:

Working voltage	AC110V-250V/50Hz-60Hz, DC12V
Standby battery	1000mA
Standby current	< 50mA, alarm current<2500mA( except the IP lighting consumption)
working temperature	-30°C~50°C
Relative humidity	10%-90%
Communication module	GSM/GPRS industrial module, 900MHz/800MHz/1900MHz
Support Phase	2/2+PROTOCOL (include data business)
Emission power	CLASS10(2W)/EGSM900, CLASS1(1W)/GSM1800
Receiving code	ASK
Remote controller frequncy of transmitter	315/433MHz
Remote controller transmission distance	≥20M
Resolution	480*640
Effective camera distance	<15M