Industrial Heavy Hammer Wall/Ceiling Mounted Exhaust Fan

^_^Why you choose our exhaust fan

  A). Fans parts are manufactured by digital machines and precision system is assisted by computers, which maximizes the effectiveness of the fan.

 B), Ten strict testing procedures to keep good quality of the fan: 1), airflow test; 2), noise test; 3), libration test; 4), drive concentric test; 5),  blade RPM test; 6), electric current test; 7), whole machine efficiency test; 8), dynamic balance test; 9),  the thickness of the galvanized sheet test; 10), the size of the spare parts test.

C)  The wet shade and fan cooling system is widely used in many places, it is the most effective cooling way for large size house, for example textile shop, cloth making shop, agriculture building and beast barn etc.

The system has characteristic of simple design, lower energy consuming, more air conditioning, reliable running. The investment of this type equipment is only 1/10 of that of normal air conditioning, and daily cost is only 1/7~1/10 of that of normal air conditioning, its more effective for textile factory and animalcule culture room.

^_^Specification

^_^Details

1, Frame:  frames are made of galvanized board, thickness 1.0mm, galvanizing layer 180g/square meter.

2, Blade:  6 pieces, material 430/201 stainless steel, mirror face.

3, Impeller, casting aluminum alloy impeller.

4, Bearing of impeller :permanently sealed bearing, size 633313.

5, Venture: galvanized board, thickness 1.0mm.

6, Blade tip clearance: 25mm, mirroe face.

7, Inlet wind protecting net:  spraying paint steel wire, thickness 2.8mm.

8, Electrical motor:  aluminum alloy frame motor, 380V/220/415V, 1.1KW/0.75KW(1.5HP/1HP), 50HZ/60HZ, 3PH/Single Phase.

9, Motor bearing, :national grade.

10, Cable: 1 meter long, strong robber wire.

11, Tensioner: plastic or aluminum.

12, Warranty : 1 year for the whole machine.But the buyer must pay the carriage.

^_^Packing & Delivery