Toys and textile burning tester  is designed according to the relevant requirements of the BS5438-1989.

Technical parameters

1. Power supply is AC220V±10%/50Hz.

2. Use the gas or liquefied petroleum gas as the source gas of the pilot flame (Under the conditions of the proposed, suggest the elect of temperament better gas).

3. The diameter of the burner is 0.19+0.02mm, the diameter of the hole is1.7mm, and the air intake hole is 4mm×4mm.

4. There are 8 steady flow at the top of hole.

5. Automatic ignition.

6. Flame height can facilitate to adjust, in accordance with the standard requirements can adjust it at 20 ± 2mm.

7. The imposing time and holding time of the flame can be adjusted in the scope of 1 to 99.99 seconds.

8. Exculpate rate is 0.01 seconds.

9. Test frame size (mm) is 560 × 150, the height positioning is 20mm, there are three mark line hook placed in it.

10. The flame test angle can be adjusted from 0° to 30°.

11.The distance between the test sample and the head of the burner is at least 75mm.

12. The process of the test is automatic control.

13. Not including the fume-hood.