200L Split Pressure Solar Water Heater(WSP)
USD $450 - $600 /Set
Min.Order:1 Set
Wuxi Wankang Solar Water Heater Co., Ltd.
200L Split Pressure Solar Water Heater(WSP) Working Principle:
Split pressurized solar water heater has solar collectors on roof and water tanks inside the house. When the difference of collector temperature and tank temperature gets to the set value, the circulation system will start work. It will transmit the solar energy from solar collector to the tank.
The operation of the solar collector is very simple:
1) Solar absorption: solar radiation is absorbed by the solar tubes and converted into heat.
2) Solar heat transfer: heat pipes conduct the heat from within the solar tube up to the header pipe
3) Solar energy storage: water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header, the temperatures is raised by 5-10 C. Throughout the day, the water in the tank is gradually heated.
Specifications:
Solar Collector: WCD-58*1800-20tubes | |
Mainfold | Material: Aluminum alloy(black or silver) |
Thickness: 2.0mm | |
Header pipe | Diameter: 32mm |
Thickness: 1.0mm copper coil | |
Heat pipe | Diameter:14mm |
Thickness:0.5mm copper coil | |
Insolation | polyurethane foam 50mm or rock wool |
Test pressure | 9bar |
Work pressure | 6bar to 8bar |
Frame | Material: Aluminum alloy |
Thickness: 2.0mm | |
Collector mounting | Flat roof/slope roof |
Inlet or outlet | 1/2" or 3/4" |
Hail resistance | 25mm |
input/output | φ22mm/22mm |
Vacuum tube | Size: 58*1800mm |
Thickness: 1.6mm, 2.0mm | |
Coating: SS-C/CU | |
Absorb area | 1.60m2 |
Qty. per 20'/40' container | 22/46 |
Separated pressurized tank:200L | |
Inner tank | Φ480 |
1.5mm thickness SUS304 2B | |
Outer tank | Φ570 |
0.5mm thickness galvanized steel | |
Insulation | 45mm thickness polyurethane foam |
Inlet or outlet | 1/2" or 3/4" |
Electric heater | 2.0KW |
Work Pressure | 6-8 bar |
Overall Dimension | Φ570*1150 |
Solar Collector
Separated Pressurized tank
Split pressurized tank