Product Details

Heat pipe solar collector For split pressurized solar system or Big project.

Model:

WCD-58*1800-30TUBES

Material:

Manifold material and thickness	aluminum alloy-2.0mm/ Stainless steel 304 2B- 0.8mm
Header pipe material and thickness	Diameter:32mm, thickness 1.0mm copper pipe
Heat pipe material and thickness	Diameter:14mm, thickness 0.5mm copper pipe
Insulation	Polyurethane foam 50mm or Rock wool
Test pressure and work pressure	Test pressure 9Bar, work pressure 6bar to 8bar
Frame material and thickness	Aluminum alloy-2.0mm/ Stainless steel-1.2mm
Collector mounting	Flat roof/slope roof
Inlet and outlet	1/2’’ OR 3/4’’
Hail resistance:	25mm
Coating of vacuum tube:	QB-AL-SS/CU-47/1500/58/1800

Features:
1. Internationally certified product
2. Reliable, efficient, twin-glass evacuated tubes with copper heat pipes for rapid heat transfer, no water enter into the tube, can be used in cold area.
3. Easy plug-in installation and maintenance.
4. Suitable for mains pressure water (up to 8 bar/116psi)
5. Corrosion resistant silver brazed copper header
6. Stable solar conversion throughout the day (tubes passively track the sun)
7. Perfect solar collector for domestic solar water heater systems.
8. Ideal for fro big project like swimming pool, school, hotel….

The operation of the solar collector is very simple.
1. Solar Absorption: Solar radiation is absorbed by the evacuated tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heat